User manual

Installation - New Netbiter Argos Account 13
Doc: HMSI-27-240, Rev: 1.2
Netbiter Remote Access User Manual
3.3. Configure Network Connection
3.3.1. Online Indication at Netbiter Argos
If the gateway is online and connected to Netbiter Argos, this will be indicated by a green star in the
column for Online, as in the illustration below. Otherwise, this indicator will show red for Offline.
3.3.2. LED Indicators
There are also several LED:s located on the Netbiter product casing. These indicate the status for the
module and for the network connection (Ethernet or GPRS/3G). See below for details of the indica-
tions provided for each connection type.
3.3.3. Ethernet connection
If the gateway was already connected via Ethernet via the WAN port during configuration, the unit
should now be indicated at Netbiter Argos as being online, as shown in the illustration above.
LED indications
The status of the Ethernet connection is also indicated by the LED:s located on the product casing, as
detailed below. If a LED is indicating a problem, check all connections and consult the product’s user
manual.
•The Gateway LED on the product casing (front panel) will show steady green for normal
operation.
•The Uplink/WAN LED (front panel) will show steady green for an active connection to
Netbiter Argos.
•The Ethernet Link LED (on the RJ-45 port) will flash orange or green for activity on a 10 or
100 Mbps Ethernet network.