User manual

Installation - New Netbiter Argos Account 12
Doc: HMSI-27-240, Rev: 1.2
Netbiter Remote Access User Manual
3.2. Activate the Field System
A field system in Netbiter Argos is one Netbiter EasyConnect Gateway plus all of the devices connect-
ed to it. A field system may have multiple devices, but only a single Netbiter Gateway. If there are e.g.
two connected Netbiter Gateways, then there are two field systems.
The new field system created above must now be activated before it can be used. The activation process
involves selecting the primary usage for the unit, as described below.
3.2.1. Decide Primary Usage
When activating the Netbiter EasyConnect EC310/350, there is a choice to be made regarding how the
system will be used. These two choices are:
View and Control - provides access to the basic remote management functions such as logging, live
values and alarms.
Remote Access - supports access to connected devices via secure tunnels over the Internet.
Select Remote Access and click the Activate button. The Status page for the unit is now displayed.
Depending on the network connection, there may be further configuration required. See section 3.3.