Operation Manual

Measuring on demand

Touching on the top button of the indoor module instantly triggers measurements. Updated data is then

directly sent to your iPhone.

Direct CO2 reading

When measuring on demand, the indoor module display CO2 level using the following color code:

- Green = Good

- Yellow = Could be improved

- Red = Room should be ventilated.

Outdoor data are not displayed ?

If your outdoor module data are not displayed in the Netatmo dashboard, although indoor measurements are

still visible, the link between the two modules might not be working. This may occur because of one of the

following reasons:

Reason 1: low on batteries

Check to outdoor module's batteries. When inserting batteries, the outdoor module should flash in green. If not

sure about your batteries still working, change them.

Measurements on demand

No outdoor data?