Datasheet
10/26/2017 LinkRunner G2 Smart Network Tester - Data Sheet | NETSCOUT
http://enterprise.netscout.com/edocs/linkrunner-g2-smart-network-tester-0 6/11
Cable verication - validate patch
cables and installed wiring for
length, reversed and crossed
pairs, as well as distance-to-fault
for opens, shorts, and split pairs.
Perform a patch cable test with
the integrated loopback ports,
simply plug each end of the patch
cord into the two RJ-45 ports on
LinkRunner G2 to see pin to pin
connectivity. Cable toning, ash
port and numbered WireView
adapters (for cable identication
and wiremap) are also supported.
Automated Results
Documentation - use the
encrypted and highly secure Link-
Live results management database
to manage an unlimited number of
test results, testers claimed to the
service and invited users. Easily
view and manage results such as
by job-specic folders, tags and
organizations. Results can include
more detailed information such as
jack location, trouble ticket,
photographs taken with the
integrated camera, or data from a
QR/barcode scan. Create
professional reports customized
with your logo and project-specic
information. Know who on your
sta is testing what, where and
when.
Packet Reector - The LinkRunner G2 packet reector mode allows it to be used as a remote device during
end-to-end network path performance tests to validate LAN and WAN throughput capabilities up to 1000BASE-T.
The reector mode can be congured to swap MAC and/or IP addresses.
LinkRunner G2 supports packet reection for:
OptiView
®
XG Network Analysis Tablet
OneTouch™ AT Network Assistant
Designed for eld use - 4-hour Li-ion battery life, recharge over PoE or with included AC adapter, rugged
design.