Datasheet
10/26/2017 LinkRunner G2 Smart Network Tester - Data Sheet | NETSCOUT
http://enterprise.netscout.com/edocs/linkrunner-g2-smart-network-tester-0 2/11
Standard AutoTest includes:
TruePower™ PoE Class 0-4,
UPOE
Link speed/duplex
Nearest switch including
slot/port/VLAN/Voice VLAN
DHCP IP Address assignment
DNS Validation
Gateway Router Validation
Reachability to target resource
i.e. internet
When customization of the AutoTest is needed, proles can be dened to
ensure a standardized test process is executed when variables about the
link under test are needed. While these settings can be easily changed in
use, proles can be congured by a senior team member to ensure less-
skilled technicians are executing an AutoTest that is specic to their
network environment, which is particularly useful in organizations who
manage distributed locations.
Examples include:
Site-specic PoE conguration
1000BASE-T validation
802.1x authentication
IPv4/IPv6
DHCP/Static IP
Proxy settings
VLAN ID and Priority
User-dened MAC
Up to 10 custom-dened ping or
TCP port open targets
At the completion of each AutoTest, the result is automatically uploaded into the included Link-Live results
management and reporting database and sent to any number of recipients via email. Users have the ability to
add additional information that will append to the link test either directly from LinkRunner G2 or through email.
Examples of useful information to
document with the AutoTest
result:
Trouble ticket number
Jack location
Use the on-board camera along
with an Android app to scan a
QR/Barcode
Attach a photo of a serial
number, asset tag or just proof
of device install