Datasheet
Cable Test
When paired with your mobile device, users can view a detailed depiction of
the cable it is connected to, showing each cable pair, cable length, and any
miswires such as opens, shorts, or split pairs.
Cable Test and Flash Port
available on Mobile UI
Split Pair detected with cable
length to open
2
Speed and Duplex
The LinkSprinter can test actual link speed against advertised speed of a switch. The Link Test
LED will turn yellow indicating a warning, and detail test results will show advertised verses
actual link speed when a Gigabit Switch port is only capable of linking at 100Mbps.
Not being able to connect can be caused by an open, short or split pair. Using the LinkSprinter,
users can further troubleshoot the problem by performing a cable test.
LinkSprinter Team Packs
The LinkSprinter was designed to be a personal tool allowing organizations to become more
eicient at problem identication and trouble ticket escalation from the PC help desk on up.
Outt your entire sta. Team packs include quantities of 5 or 10 units at a discounted price
(See Models & Accessories for more information). The Holster is not included in the Team
Packs, so don’t forget to add those to your order!
Blink Link Light and Identify Switch Port Connected
Verify the connection path between the jack location and switch port using the LinkSprinter.
LinkSprinter will identify the switch name and port # by analyzing the CDP/LLDP packet from
the switch. It can blink the link light on the switch port it is connected to, allowing users to
identify the full connection path.
LinkSprinter 5 Pack
LinkSprinter Congured to test at 1
Gbps, but can only connect at 100
Switch Information