Datasheet

4
Key Service and Device Connectivity
LinkRunner G2 can run ping, TCP port open, or HTTP connection tests. The
test conducted will reveal connection and response time to the default
Gateway, preferred DNS server, and alternate DNS server. The LinkRunner
G2 connection test supports unlimited user-defined target devices,
servers, or services, based on IP address or URL. Continuous testing can
be executed on a specific target to verify intermittent behavior, based on
response time.
Programmable AutoTest Profile for IoT Projects
Some IoT systems installations require conducting network services tests
at various stages of deployment. The necessary AutoTest Profiles can be
created, such that the LinkRunner G2’s will test for the specific configuration
needed at each installation stage, providing clear Pass/Fail documentation
of the deployment.
Additional information can be appended to the test results, such as images
of the location where the device is deployed (using LinkRunner G2’s onboard
camera), the serial number of the IoT device as scanned by a barcode app,
and technician comments.
Barcode QR Code Scanner AutoTest Stop Aer Setting
Gateway Test DNS Test
Cable Length, Wiremap, and Location
Easily find opens, shorts, miswires, and split pairs three dierent ways:
• On non-terminated cable
• With a WireView Cable Identifier
• With the built-in wiremap port on the side of the LinkRunner AT
LinkRunner G2 has the unique capability to detect and test distance to open
even when the cable is connected to a switch.
Cable Location
Locate cable runs with toning, switch port advertisement, switch port link
light blinking, and remote cable identifiers. Toning supports both analog
and digital IntelliTone modes.
Distance to Open while
connected to Switch
Wiremap Test