Datasheet
6
Operating frequencies
NOTE: These are the
center frequencies of
the channels that the
AirCheck G2 tester
supports.
Frequencies of channels received: (NOTE: The tester receives on all the frequencies in every country.)
2.4 GHz band: 2.412 – 2.484 GHz (channel 1 to channel 14)
5 GHz band: 5.170 – 5.320 GHz, 5.500 – 5.700 GHz, 5.745 – 5.825 GHz (channels
34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157,
161, 165)
Frequencies of channels transmitted:
NOTE: The tester transmits only on the frequencies allowed in the country where it is operating.
2.4 GHz band
802.11b: 2.412 – 2.484 GHz (channel 1 to channel 14)
802.11g/n 20 MHz BW (HT20): 2.412 – 2.472 GHz (channel 1 to channel 13)
802.11n 40 MHz BW (HT40): 2.422 – 2.462 GHz (includes all combinations of legal, bonded pairs of
channels)
5 GHz band
802.11a/n 20 MHz BW (HT20): 5.180 – 5.320 GHz, 5.500 – 5.700 GHz, 5.745 – 5.825 GHz (channels 36, 40, 44,
48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165)
802.11n 40 MHz BW (HT40/VHT40): 5.190 – 5.310 GHz, 5.510 – 5.670 GHz, 5.755 – 5.795 GHz (includes all
combinations of legal, bonded pairs of channels)
802.11ac 80 MHz BW (VHT80): 5.210 – 5.290 GHz, 5.530 – 5.690 GHz, 5.775 GHz (includes all combinations of
legal, bonded pairs of channels)
Specications continued
Antennas
Internal Wi-Fi antennas Three internal 2.4 GHz, 1.1 dBi peak, 5 GHz, 3.2 dBi peak antennas.
External directional
antenna
Antenna, frequency range 2.4 - 2.5 and 4.9 - 5.9 GHz.
Minimum gain 5.0 dBi peak in the 2.4 GHz band, and 7.0 dBi peak in the 5 GHz band.
AirCheck G2 Manager Soware
Supported Operating
Systems
Windows® 8.1, Windows® 10
Processor
400 MHz Pentium processor or equivalent (minimum); 1 GHz Pentium processor or equivalent
(recommended) RAM 96 MB (minimum)
RAM 256 MB (minimum); 512 MB (recommended)
Hard disk Up to 500 MB of available space may be required
Display 1280 x 1024 high color, 32-bit (recommended)
Hardware USB Port
Certications and Compliance
Conforms to relevant European Union directives
Conforms to relevant Australian Safety and EMC standards.
Certied by CSA Group to North American safety standards.
Complies with 47 CFR Part 15 requirements of the U.S. Federal Communications Commission.
Certied by the National Agency of Telecommunications (Anatel).
Conforms to relevant South Korean EMC Standards.
Additional South Korean EMC Standards Information
Electromagnetic Compatibility. Applies to use in Korea only. Class A Equipment (Industrial Broadcasting & Communications Equipment)
[1]
[1]
This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This
equipment is intended for use in business environments and is not to be used in homes.
ACKG2-DS-20-V3
simplicity • visibility • collaboration
©2020 NetAlly. NetAlly® is a registered trademark of LinkRunner® LLC dba NetAlly. Third-party trademarks mentioned are the property of their respective owners.
netally.com/products/aircheck