User Manual

Table Of Contents
Performing a Network Roaming Test and AP Range Test
84
4
Use the keyboard to enter the IP address or host name
of the target.
5
Select DONE.
The Roaming Test Screen
The Roaming Test screen displays the following information:
AP Name: Shows the name of the AP to which AirCheck G2 is
currently connected.
NOTE: When the tester roams, the new AP is shown here.
If AirCheck G2 disconnects from the network (no APs
available), and then comes within range of the AP, it
reconnects to the selected network's AP and continue
the ping tests.
Target: The selected test target, which can be the default
gateway, DHCP server, primary DNS server, secondary DNS
server, hostname, or a user-defined target.
Figure 57. Network Roaming Test Screen