User Manual

Verifying Connectivity and Coverage
73
Figure 49. Completed Connect to AP Screen
Next Steps
After running Connection tests, select a button at the bottom
of the screen to perform additional actions:
• On the completed Connect to AP or Connect to Network
test screen (Figure 49), tap Tests to op
en the Test Type
screen.
– If you are connected to an AP, press Ra
nge Test to
begin a range test for the AP.
See “The Access Point Range Test,” page 86.
– If you are connected to a Network, press Roaming
Test to begin a roaming test for the network. See
“Performing a Network Roaming Test and AP Range
Test,” page 83.
– For either a Network or AP connection, press iPerf
Test to initiate iPerf performance testing. See
“Conducting iPerf Performance Testing,” page 90.
• Press the Log butt
on to see details about the connection
procedure.
• Press the Sav
e button to save the connection test
results and current discovery data to a session file. See
“Saving Session Files and Packet Cap
tures,” page 95.
• Tap the Co
mment button to edit the Test Comment
or Job Comment to be uploaded to Link-Live and
associated with your test result. See “Adding
Comments,” page 36.