User Manual
Table Of Contents
- User Manual
- LEGAL NOTIFICATION
- Table of Contents
- List of Figures
- 1. Introduction
- 2. AirCheck G2 Tester Physical Features
- 3. The AirCheck G2 Home Screen
- 4. Discovering Networks and Access Points
- 5. Viewing Channel Usage
- 6. Discovering Clients
- 7. Detecting Interferers
- 8. Using AutoTest to Diagnose Your Network Health
- 9. Conducting a Site Survey Using AirMapper
- 10. Testing Ethernet for Access Point Backhaul
- 11. Companion Services
- 12. Customizing the Tester for your Network
- 13. Verifying Connectivity and Coverage
- 14. Locating an Access Point, Client, or Interferer
- 15. Performing a Network Roaming Test and AP Range Test
- 16. Conducting iPerf Performance Testing
- 17. Saving Test Sessions, Packet Captures, and Screenshots
- 18. Managing Files on the AirCheck G2 Tester
- 19. All AirCheck G2 Settings
- 20. Maintenance
- 21. Specifications and Compliance
- Appendix A: Quick Reference: Examining your Network Health
- How is my Network Quality?
- What is in the Wireless Environment?
- Can Devices Connect to My Network?
- What is Causing Slow Network Performance or Dropped Connections?
- Are There Security Risks in My Network?
- Where is an Access Point?
- What Networks or Access Points Come into Range as I Move?
- How Can I Document My Network and My Test Session?
Verifying Connectivity and Coverage
68
Running a Connect to Network or Connect to
AP Test
1
From the Home Screen, tap Networks or Access Points.
2
Tap the row of the relevant network or AP to open its
Details screen.
3
From the Network or AP details screen, tap the Connect
button at the bottom of the screen to open the Connect
to Network or Connect to AP screen,
see Figure 44.
When you press Connect,
• If an AP supports more than one network, a screen
appears
with a list of SSIDs, allowing you to select the
SSID to which you want to connect.
• If you have not
configured the network in the current
Profile, the configuration screen opens. Configure the
appropriate security settings, and tap Apply to
connect.
• If the network or AP’s credentials are already saved in
the Profile, the
connection test starts.
The results are displayed as they become available.
Figure 44. The Connect to Network Test (In Progress)
When a connection test finishes,
the tester stays connected
to the AP until you tap the Back or Home button.