User Manual
Table Of Contents
- User Manual
- LEGAL NOTIFICATION
- Table of Contents
- List of Figures
- 1. Introduction
- 2. AirCheck G2 Tester Physical Features
- 3. The AirCheck G2 Home Screen
- 4. Discovering Networks and Access Points
- 5. Viewing Channel Usage
- 6. Discovering Clients
- 7. Detecting Interferers
- 8. Using AutoTest to Diagnose Your Network Health
- 9. Conducting a Site Survey Using AirMapper
- 10. Testing Ethernet for Access Point Backhaul
- 11. Companion Services
- 12. Customizing the Tester for your Network
- 13. Verifying Connectivity and Coverage
- 14. Locating an Access Point, Client, or Interferer
- 15. Performing a Network Roaming Test and AP Range Test
- 16. Conducting iPerf Performance Testing
- 17. Saving Test Sessions, Packet Captures, and Screenshots
- 18. Managing Files on the AirCheck G2 Tester
- 19. All AirCheck G2 Settings
- 20. Maintenance
- 21. Specifications and Compliance
- Appendix A: Quick Reference: Examining your Network Health
- How is my Network Quality?
- What is in the Wireless Environment?
- Can Devices Connect to My Network?
- What is Causing Slow Network Performance or Dropped Connections?
- Are There Security Risks in My Network?
- Where is an Access Point?
- What Networks or Access Points Come into Range as I Move?
- How Can I Document My Network and My Test Session?
Customizing the Tester for your Network
65
How to: Change the Thresholds on the Tester
1
Tap Settings on the Home Screen.
2
Select Thresholds.
Figure 41. Thresholds Screen
3
Tap the and buttons to increase or decrease the
measurements that receives a rating of Pass (green) or
Fail (red). The range in between receives the Warning
(yellow) rating.
For a list of all Thresholds, see “AutoTe
st Settings” on page
118.
Changing the Location Settings and Language
The Location Settings configure the tester to show illegal
channels for the selected country in red text. See “The
Channels Utilization Screen,” page 21.
How to: Change the Location Settings
1
In the Settings menu, tap Location Settings.
2
Select your country from the drop-down menu.
3
Tap Apply.
How to: Change the Language on the Tester
1
In the Settings menu, tap Device Settings.
2
Tap Language.
3
Select your language from the list of those available.
4
Tap Apply.
The tester reboots and then show the selected language.