User Manual
Table Of Contents
- User Manual
- LEGAL NOTIFICATION
- Table of Contents
- List of Figures
- 1. Introduction
- 2. AirCheck G2 Tester Physical Features
- 3. The AirCheck G2 Home Screen
- 4. Discovering Networks and Access Points
- 5. Viewing Channel Usage
- 6. Discovering Clients
- 7. Detecting Interferers
- 8. Using AutoTest to Diagnose Your Network Health
- 9. Conducting a Site Survey Using AirMapper
- 10. Testing Ethernet for Access Point Backhaul
- 11. Companion Services
- 12. Customizing the Tester for your Network
- 13. Verifying Connectivity and Coverage
- 14. Locating an Access Point, Client, or Interferer
- 15. Performing a Network Roaming Test and AP Range Test
- 16. Conducting iPerf Performance Testing
- 17. Saving Test Sessions, Packet Captures, and Screenshots
- 18. Managing Files on the AirCheck G2 Tester
- 19. All AirCheck G2 Settings
- 20. Maintenance
- 21. Specifications and Compliance
- Appendix A: Quick Reference: Examining your Network Health
- How is my Network Quality?
- What is in the Wireless Environment?
- Can Devices Connect to My Network?
- What is Causing Slow Network Performance or Dropped Connections?
- Are There Security Risks in My Network?
- Where is an Access Point?
- What Networks or Access Points Come into Range as I Move?
- How Can I Document My Network and My Test Session?
Customizing the Tester for your Network
61
How to: Transfer a Profile from a PC to the Tester
NOTE: See the AirCheck G2 Manager Help for
additional instructions.
1
Use the Profile Setup in AirCheck G2 Manager to make a
Profile.
2
Connect the tester to the PC using the USB cable
supplied.
3
Wait for AirCheck G2 Manager to show a green
“Connected” indicator at the top left.
4
In AirCheck G2 Manager, drag and drop the Profile name
from the right panel, “Local Profiles,” to the left panel,
“AirCheck G2 Profiles” to transfer the Profile to the
tester.
NOTE: Yo
u must Load the Profile on the tester before you
can use it.
How to: Delete a Profile on the Tester
1
Select Settings > Profiles.
2
Tap Delete.
3
Select the checkboxes for the Profiles you want to delete.
NOTE: You cannot delete the currently active Profile.
4
Tap Apply.
5
Confirm that you want to delete by tapping Yes.
How to: Upload a Profile to Link-Live
1
From the Home Screen, tap the Settings button.
2
Tap Profiles.
3
Tap Push to Link-Live, and select the checkbox for one
or more Profile names from the list.
4
Tap Apply.
5
Confirm that you want to push the profiles to Link-Live
by tapping Yes.
The selected profiles are uploaded to Link-Live whenever an
active wired or Wi-Fi connection is available.
NOTE: Existing profiles with the same name are
overwritten if pushed to Link-Live or downloaded to an
AirCheck G2 unit.
Access your uploaded Profiles on Link-Live.com from the left-
side navigation drawer by clicking the navigation menu icon
, and then selecting Settings > AirCheck G2 Profiles.