User Manual
Table Of Contents
- User Manual
- LEGAL NOTIFICATION
- Table of Contents
- List of Figures
- 1. Introduction
- 2. AirCheck G2 Tester Physical Features
- 3. The AirCheck G2 Home Screen
- 4. Discovering Networks and Access Points
- 5. Viewing Channel Usage
- 6. Discovering Clients
- 7. Detecting Interferers
- 8. Using AutoTest to Diagnose Your Network Health
- 9. Conducting a Site Survey Using AirMapper
- 10. Testing Ethernet for Access Point Backhaul
- 11. Companion Services
- 12. Customizing the Tester for your Network
- 13. Verifying Connectivity and Coverage
- 14. Locating an Access Point, Client, or Interferer
- 15. Performing a Network Roaming Test and AP Range Test
- 16. Conducting iPerf Performance Testing
- 17. Saving Test Sessions, Packet Captures, and Screenshots
- 18. Managing Files on the AirCheck G2 Tester
- 19. All AirCheck G2 Settings
- 20. Maintenance
- 21. Specifications and Compliance
- Appendix A: Quick Reference: Examining your Network Health
- How is my Network Quality?
- What is in the Wireless Environment?
- Can Devices Connect to My Network?
- What is Causing Slow Network Performance or Dropped Connections?
- Are There Security Risks in My Network?
- Where is an Access Point?
- What Networks or Access Points Come into Range as I Move?
- How Can I Document My Network and My Test Session?
Customizing the Tester for your Network
60
• To save the Profile with the current name (shown at
the top left of the screen), press Save. The tester asks
if you want to overwrite the existing Profile name
before saving.
• To save the Profile with a new name:
e. Select Sa
ve As.
Figure 37. Profiles > Save As
f. Tap Name and use the on-screen keyboard to
type in a new name.
g. Tap DONE when finished.
• To save a Se
cured Profile:
a. Tap the down arrow to change the default Type
fro
m Open to Secured.
b. Tap Password to enter a password on the on-
screen keyboard.
Caution
Ensure that you enter the password as you intend it.
Tap the open lock icon to double-check that it is
correct. If you enter the password incorrectly here, or
forget the password, you may not be able to access
your Secured Profile again.
c. Tap DONE when you finish entering the password.
• Tap Apply when you fini
sh configuring the Profile.
How to: Load a Profile Saved in the AirCheck G2 Tester
1
From the Home Screen, tap the Settings button.
2
Tap Profiles.
3
Tap Load, and select a Profile name from the list.
4
Tap Apply.
5
Enter the password if the Profile is secured.
NOTE: This icon next to a profile’s name on the Load
Profile screen indicates that the profile was downloaded
from Link-Live.