User Manual
Table Of Contents
- User Manual
- LEGAL NOTIFICATION
- Table of Contents
- List of Figures
- 1. Introduction
- 2. AirCheck G2 Tester Physical Features
- 3. The AirCheck G2 Home Screen
- 4. Discovering Networks and Access Points
- 5. Viewing Channel Usage
- 6. Discovering Clients
- 7. Detecting Interferers
- 8. Using AutoTest to Diagnose Your Network Health
- 9. Conducting a Site Survey Using AirMapper
- 10. Testing Ethernet for Access Point Backhaul
- 11. Companion Services
- 12. Customizing the Tester for your Network
- 13. Verifying Connectivity and Coverage
- 14. Locating an Access Point, Client, or Interferer
- 15. Performing a Network Roaming Test and AP Range Test
- 16. Conducting iPerf Performance Testing
- 17. Saving Test Sessions, Packet Captures, and Screenshots
- 18. Managing Files on the AirCheck G2 Tester
- 19. All AirCheck G2 Settings
- 20. Maintenance
- 21. Specifications and Compliance
- Appendix A: Quick Reference: Examining your Network Health
- How is my Network Quality?
- What is in the Wireless Environment?
- Can Devices Connect to My Network?
- What is Causing Slow Network Performance or Dropped Connections?
- Are There Security Risks in My Network?
- Where is an Access Point?
- What Networks or Access Points Come into Range as I Move?
- How Can I Document My Network and My Test Session?
Customizing the Tester for your Network
59
• iPerf Settings
• Location and Language
• Thresholds for the colored bar graphs and Pass,
W
arning, and Fail ratings
• Imported Certificates
• AirMapper settings (excluding floor plans)
Profiles can be password protected so that unauthorized
users
cannot use the tester to connect to secure networks or
access network security credentials on the AirCheck G2
Manager PC application.
The AirCheck G2’s Home Screen shows the name of the
Profile the tester is using at the top left. The name shows an
asterisk (*) if you have changed a setting on the tester since
you last saved the Profile.
You can create and edit Profiles on both the AirCheck G2 and
in AirCheck G2 Manager on a personal computer (PC).
You can also upload saved Profiles to Link-Live, and then
download them to other AirCheck G2s.
How to: Save the Current Settings as a Profile on the
AirCheck G2 Tester
Multiple Profiles can be saved on the tester, but only one
Profile at a time can be active.
1
To access the profiles screen, tap the Profile name at the
top left corner of the AirCheck G2 screen, or
from the Home Screen, tap the Settings button and
select Pr
ofiles.
Figure 36. Settings > Profiles Menu
2
Tap Save or Save as.