User Manual
Table Of Contents
- User Manual
- LEGAL NOTIFICATION
- Table of Contents
- List of Figures
- 1. Introduction
- 2. AirCheck G2 Tester Physical Features
- 3. The AirCheck G2 Home Screen
- 4. Discovering Networks and Access Points
- 5. Viewing Channel Usage
- 6. Discovering Clients
- 7. Detecting Interferers
- 8. Using AutoTest to Diagnose Your Network Health
- 9. Conducting a Site Survey Using AirMapper
- 10. Testing Ethernet for Access Point Backhaul
- 11. Companion Services
- 12. Customizing the Tester for your Network
- 13. Verifying Connectivity and Coverage
- 14. Locating an Access Point, Client, or Interferer
- 15. Performing a Network Roaming Test and AP Range Test
- 16. Conducting iPerf Performance Testing
- 17. Saving Test Sessions, Packet Captures, and Screenshots
- 18. Managing Files on the AirCheck G2 Tester
- 19. All AirCheck G2 Settings
- 20. Maintenance
- 21. Specifications and Compliance
- Appendix A: Quick Reference: Examining your Network Health
- How is my Network Quality?
- What is in the Wireless Environment?
- Can Devices Connect to My Network?
- What is Causing Slow Network Performance or Dropped Connections?
- Are There Security Risks in My Network?
- Where is an Access Point?
- What Networks or Access Points Come into Range as I Move?
- How Can I Document My Network and My Test Session?
Companion Services
56
Figure 33. Successful Link-Live Upload Field
If no connection is available, the test
er queues up to 100
entries before overwriting previous results.
You can also configure uploading and notification settings on
the Link-Live Cloud Service web site. For more information
about Link-Live, click Support > Questions from the left-side
navigation drawer on the Link-Live web page.
For instructions on uploading Profiles to Link-Live, see “How
to: Upload a Profile to Link-Live” on page 61.
For instructions on uploading Session, Screenshot, and
Capture files to Link-Live, see “How to: Upload Files to Link-
Live” on page 103.
For instructions on updating your AirCheck G2 software using
Link-Live, see “How to: Update Firmware over Link-Live” on
page 127.
Getting Started with the AirCheck G2 Manager
PC Application
You can use the AirCheck G2 Manager computer application
for the following activities:
• Upgrade the AirCheck G2’s firmware.
• Update the AirCheck G2’s Vendor MAC Prefix file.
• View measurement results saved as session files.
• Generate reports from session files.
• Set up the AirCheck G2 configuration by creating Profiles.
• Configure security credentials for the network(s)
containing any key d
evices that you are pinging.
• Transfer Profiles with saved settings to the tester.
• Transfer screen capture images from the AirCheck G2
to
a PC.
Download the AirCheck G2 Manager software from Link-Live
at https://app.link-live.com/downloads.
After downloading and installing the application, connect
your AirCheck G2 to the PC using the supplied Micro Type B
to USB cord.