User Manual
Table Of Contents
- User Manual
- LEGAL NOTIFICATION
- Table of Contents
- List of Figures
- 1. Introduction
- 2. AirCheck G2 Tester Physical Features
- 3. The AirCheck G2 Home Screen
- 4. Discovering Networks and Access Points
- 5. Viewing Channel Usage
- 6. Discovering Clients
- 7. Detecting Interferers
- 8. Using AutoTest to Diagnose Your Network Health
- 9. Conducting a Site Survey Using AirMapper
- 10. Testing Ethernet for Access Point Backhaul
- 11. Companion Services
- 12. Customizing the Tester for your Network
- 13. Verifying Connectivity and Coverage
- 14. Locating an Access Point, Client, or Interferer
- 15. Performing a Network Roaming Test and AP Range Test
- 16. Conducting iPerf Performance Testing
- 17. Saving Test Sessions, Packet Captures, and Screenshots
- 18. Managing Files on the AirCheck G2 Tester
- 19. All AirCheck G2 Settings
- 20. Maintenance
- 21. Specifications and Compliance
- Appendix A: Quick Reference: Examining your Network Health
- How is my Network Quality?
- What is in the Wireless Environment?
- Can Devices Connect to My Network?
- What is Causing Slow Network Performance or Dropped Connections?
- Are There Security Risks in My Network?
- Where is an Access Point?
- What Networks or Access Points Come into Range as I Move?
- How Can I Document My Network and My Test Session?
Conducting a Site Survey Using AirMapper
45
9. CONDUCTING A SITE SURVEY USING AIRMAPPER
The AirMapper Site Survey tool lets you perform a Wi-Fi
survey of an indoor or outdoor site and upload data to the
Link-Live Cloud Service or export to AirMagnet Survey PRO.
You can then generate heat maps and view Wi-Fi
measurements for each collection point.
The AirMapper Screen
From the Home Screen, tap AirMapper to open the
AirMapper screen, which displays any preloaded site floor
plans.
Start: Tap Start to begin a survey using the current or default
settings. If you have not previously selected a floor plan, you
are prompted to use the Settings screen to select a floor plan.
See “Conducting the Survey” on page 49.
Settings: Tap Settings to change the basic settings for the
survey using the current or default settings.
See “Changing the Survey Settings” on page 46.
Rotate: Tap the Rotate icon to rotate the floor plan 90
degrees.
Figure 29. AirMapper Screen