User Manual
Table Of Contents
- User Manual
- LEGAL NOTIFICATION
- Table of Contents
- List of Figures
- 1. Introduction
- 2. AirCheck G2 Tester Physical Features
- 3. The AirCheck G2 Home Screen
- 4. Discovering Networks and Access Points
- 5. Viewing Channel Usage
- 6. Discovering Clients
- 7. Detecting Interferers
- 8. Using AutoTest to Diagnose Your Network Health
- 9. Conducting a Site Survey Using AirMapper
- 10. Testing Ethernet for Access Point Backhaul
- 11. Companion Services
- 12. Customizing the Tester for your Network
- 13. Verifying Connectivity and Coverage
- 14. Locating an Access Point, Client, or Interferer
- 15. Performing a Network Roaming Test and AP Range Test
- 16. Conducting iPerf Performance Testing
- 17. Saving Test Sessions, Packet Captures, and Screenshots
- 18. Managing Files on the AirCheck G2 Tester
- 19. All AirCheck G2 Settings
- 20. Maintenance
- 21. Specifications and Compliance
- Appendix A: Quick Reference: Examining your Network Health
- How is my Network Quality?
- What is in the Wireless Environment?
- Can Devices Connect to My Network?
- What is Causing Slow Network Performance or Dropped Connections?
- Are There Security Risks in My Network?
- Where is an Access Point?
- What Networks or Access Points Come into Range as I Move?
- How Can I Document My Network and My Test Session?
Discovering Networks and Access Points
10
The Networks List Screen
Figure 3. Networks List Screen
The Netw
orks list screen provides an overview of the Wi-Fi
networks that the AirCheck G2 has discovered in your
environment. The networks are identified by SSID.
Networks (#): The screen title displays the number of
networks discovered by the tester.
Sort (Option Field): This field shows the sort option that
is currently applied. In Figure 3, the sort option applied is
Signal Strength.
This is the default.
Tap the So
rt: field to change the order in which networks
are listed. The value by which the list is sorted shows
prominently for each network. For example, if you
change to Sort by Client Count, the Networks list screen
displays the number of connected Clients on each
network (See Figure 5), instead of the SNR, as shown in
Figure 3.
Sort Order Button: These arrows switch the list
order from ascending to descending, and vice versa.
SSID: Service Set Identifier; The name of the wireless
network.
Signal Strength Bar Graph: The signal strength in
dBm of the AP with the strongest signal strength
connected to the network.
Security status of the network:
Red open lock: The network does not have security
enabled.