User Manual
Table Of Contents
- User Manual
- LEGAL NOTIFICATION
- Table of Contents
- List of Figures
- 1. Introduction
- 2. AirCheck G2 Tester Physical Features
- 3. The AirCheck G2 Home Screen
- 4. Discovering Networks and Access Points
- 5. Viewing Channel Usage
- 6. Discovering Clients
- 7. Detecting Interferers
- 8. Using AutoTest to Diagnose Your Network Health
- 9. Conducting a Site Survey Using AirMapper
- 10. Testing Ethernet for Access Point Backhaul
- 11. Companion Services
- 12. Customizing the Tester for your Network
- 13. Verifying Connectivity and Coverage
- 14. Locating an Access Point, Client, or Interferer
- 15. Performing a Network Roaming Test and AP Range Test
- 16. Conducting iPerf Performance Testing
- 17. Saving Test Sessions, Packet Captures, and Screenshots
- 18. Managing Files on the AirCheck G2 Tester
- 19. All AirCheck G2 Settings
- 20. Maintenance
- 21. Specifications and Compliance
- Appendix A: Quick Reference: Examining your Network Health
- How is my Network Quality?
- What is in the Wireless Environment?
- Can Devices Connect to My Network?
- What is Causing Slow Network Performance or Dropped Connections?
- Are There Security Risks in My Network?
- Where is an Access Point?
- What Networks or Access Points Come into Range as I Move?
- How Can I Document My Network and My Test Session?
All AirCheck G2 Settings
123
Tap the Add Certificate button to import a certificate from a
USB drive inserted into one of the USB ports on the AirCheck
G2.
NOTES:
• AirCheck G2 requires that a certificate and a key are
both saved in a single file.
• Most certificate formats require a password to
unencrypt the key.
To delete an imported certificate, tap the (Delete) icon to
the right of the certificate's name.
Device Settings
The Device Settings screen provides tools for configuring the
device settings, as listed below.
NOTE: Tap an option to configure it. While some options
(i.e., Number Format, Audio, Brightness, Restore Factory
Defaults, and Export Log) can be managed directly on the
Device Settings screen, many open separate screens
with tools for configuring those settings.
Date and Time: Configures the date and time on AirCheck
G2.
Language: Sets the AirCheck G2's language. See “How to:
Change the Language on the Tester,” page 65.
Number Format: Toggles between 0.0 and 0,0 number
formats. By default, AirCheck G2 uses the decimal (0.0)
number format. You can change to comma (0,0) number
format (or vice versa) by tapping the down arrow ,
selecting the new format, and tapping Apply.
Audio: Turns audio On or Off. Audio is used when locating
APs or clients.
USB Headset Volume: Increases or decreases the headset
audio volume when a USB headset is connected to AirCheck
G2. NOTE: When a USB headset is plugged into the AirCheck
G2, audio automatically switches to the headset.