User Manual
Table Of Contents
- User Manual
- LEGAL NOTIFICATION
- Table of Contents
- List of Figures
- 1. Introduction
- 2. AirCheck G2 Tester Physical Features
- 3. The AirCheck G2 Home Screen
- 4. Discovering Networks and Access Points
- 5. Viewing Channel Usage
- 6. Discovering Clients
- 7. Detecting Interferers
- 8. Using AutoTest to Diagnose Your Network Health
- 9. Conducting a Site Survey Using AirMapper
- 10. Testing Ethernet for Access Point Backhaul
- 11. Companion Services
- 12. Customizing the Tester for your Network
- 13. Verifying Connectivity and Coverage
- 14. Locating an Access Point, Client, or Interferer
- 15. Performing a Network Roaming Test and AP Range Test
- 16. Conducting iPerf Performance Testing
- 17. Saving Test Sessions, Packet Captures, and Screenshots
- 18. Managing Files on the AirCheck G2 Tester
- 19. All AirCheck G2 Settings
- 20. Maintenance
- 21. Specifications and Compliance
- Appendix A: Quick Reference: Examining your Network Health
- How is my Network Quality?
- What is in the Wireless Environment?
- Can Devices Connect to My Network?
- What is Causing Slow Network Performance or Dropped Connections?
- Are There Security Risks in My Network?
- Where is an Access Point?
- What Networks or Access Points Come into Range as I Move?
- How Can I Document My Network and My Test Session?
All AirCheck G2 Settings
114
Default AP
Authorization
Allows you to change the default AP Authorization Class that is assigned
to all APs without an individual, manually user-assigned Authorization
Class.
Tap the drop-down arrow to switch from the None designation to either
Authorized , if you want all APs to have the Authorized class by
default, or to Unknown , if you want all APs to show as Unknown
unless they have an individual assigned class.
Access Points
Roam Threshold (The AirCheck must be connected as a Wi-Fi client to use this setting.)
Allows you to specify the signal strength (in dBm) below which the unit
attempt to roam to another AP with a matching SSID. This can be used to
simulate roaming behavior of other Wi-Fi client devices while performing
a Roaming Test with the AirCheck G2.
Access Points