User Manual
Table Of Contents
- User Manual
- LEGAL NOTIFICATION
- Table of Contents
- List of Figures
- 1. Introduction
- 2. AirCheck G2 Tester Physical Features
- 3. The AirCheck G2 Home Screen
- 4. Discovering Networks and Access Points
- 5. Viewing Channel Usage
- 6. Discovering Clients
- 7. Detecting Interferers
- 8. Using AutoTest to Diagnose Your Network Health
- 9. Conducting a Site Survey Using AirMapper
- 10. Testing Ethernet for Access Point Backhaul
- 11. Companion Services
- 12. Customizing the Tester for your Network
- 13. Verifying Connectivity and Coverage
- 14. Locating an Access Point, Client, or Interferer
- 15. Performing a Network Roaming Test and AP Range Test
- 16. Conducting iPerf Performance Testing
- 17. Saving Test Sessions, Packet Captures, and Screenshots
- 18. Managing Files on the AirCheck G2 Tester
- 19. All AirCheck G2 Settings
- 20. Maintenance
- 21. Specifications and Compliance
- Appendix A: Quick Reference: Examining your Network Health
- How is my Network Quality?
- What is in the Wireless Environment?
- Can Devices Connect to My Network?
- What is Causing Slow Network Performance or Dropped Connections?
- Are There Security Risks in My Network?
- Where is an Access Point?
- What Networks or Access Points Come into Range as I Move?
- How Can I Document My Network and My Test Session?
All AirCheck G2 Settings
110
Link-Live Connection: Toggle this field On or Off to enable
or disable automatic uploading of test results from the tester
to Link-Live Cloud Service.
NOTE: If this setting is Off, the AirCheck G2 does not scan
for or display Test Accessories from Link-Live on the
Select iPerf Server screen for iPerf testing. See “The
Select iPerf Server Screen,” page 90.
Check for Software Update: If your unit is claimed, tap this
field to find out if a software update is available to download
and install from Link-Live. If an update is available, a pop-up
dialog displays the version number and prompts you to
confirm if you want to install.
Claim Unit: You must tap this button during the process to
claim the tester in Link-Live Cloud Service. See “Getting
Started in Link-Live Cloud Service,” page 55.
Once your AirCheck G2 unit is successfully claimed, the Claim
Unit button changes to Unclaim Unit, which you can tap to
unclaim your unit from Link-Live. The lower part of this
screen displays the unit's name, the Link-Live organization
where it is claimed, and the first associated email to which
test results are sent. Visit the Units page on Link-Live.com to
change the Unit Name and Email.
Job Comment: Tap this field to add or edit the Job Comment.
The Job Comment set here is uploaded to Link-Live and
associated with all future uploaded test results and files. You
can use the Job Comment and other types of comments
(Test, Session, or Screen Comments) to automatically
organize your test results and files into folders on Link-Live
and make them easily searchable. The Job Comment persists
until you delete or edit it from the Link-Live Settings screen or
from another screen (like Save Session or Comments) on
your AirCheck G2. Only one Job Comment is active at any
time.
Web Proxy: This option enables uploading of test results to
your Link-Live account through a web proxy. By default, Web
Proxy support is Off. Tap the toggle switch to turn the Web
Proxy setting On or Off.
How to: Configure Link-Live Settings for Web Proxy
1
Tap IP Address to enter the IP of the proxy server. Tap
DONE when you finish.
2
If necessary, tap Port to change the default Port number.
3
Select Username to enter the proxy username and
Password to enter the password.
4
Tap Apply to save your changes or Cancel to leave this
screen without saving your changes.