User Manual
Table Of Contents
- User Manual
- LEGAL NOTIFICATION
- Table of Contents
- List of Figures
- 1. Introduction
- 2. AirCheck G2 Tester Physical Features
- 3. The AirCheck G2 Home Screen
- 4. Discovering Networks and Access Points
- 5. Viewing Channel Usage
- 6. Discovering Clients
- 7. Detecting Interferers
- 8. Using AutoTest to Diagnose Your Network Health
- 9. Conducting a Site Survey Using AirMapper
- 10. Testing Ethernet for Access Point Backhaul
- 11. Companion Services
- 12. Customizing the Tester for your Network
- 13. Verifying Connectivity and Coverage
- 14. Locating an Access Point, Client, or Interferer
- 15. Performing a Network Roaming Test and AP Range Test
- 16. Conducting iPerf Performance Testing
- 17. Saving Test Sessions, Packet Captures, and Screenshots
- 18. Managing Files on the AirCheck G2 Tester
- 19. All AirCheck G2 Settings
- 20. Maintenance
- 21. Specifications and Compliance
- Appendix A: Quick Reference: Examining your Network Health
- How is my Network Quality?
- What is in the Wireless Environment?
- Can Devices Connect to My Network?
- What is Causing Slow Network Performance or Dropped Connections?
- Are There Security Risks in My Network?
- Where is an Access Point?
- What Networks or Access Points Come into Range as I Move?
- How Can I Document My Network and My Test Session?
All AirCheck G2 Settings
109
5
Select Apply to save your configuration.
6
Repeat Steps 1 through 4 to add more APs if needed.
How to: Edit an AP
1
Select (Edit).
2
Make the desired changes.
3
Select Apply.
How to: Delete an AP
1
Select (Delete).
2
Select Yes in the pop-up confirmation message window.
Link-Live Settings
The Link-Live Settings screen allows you to enable or disable
the Link-Live connection and test result field, Claim or
Unclaim your AirCheck G2 to Link-Live Cloud Service, and
update your tester with the latest software.
To use Link-Live, the Link-Live Connection setting on your
AirCheck G2 must be On, and your unit must be “Claimed.”
See “Getting Started in Link-Live Cloud Service,” page 55.
NOTE: Visit the Link-Live Knowledge Base to view articles
describing how to use Link-Live Cloud Service.
Figure 74. Link-Live Settings Screen
MAC Address: Shows the
MAC address of the AirCheck G2
unit.