Specification Sheet
2
Access Point List
Access Point Discovery
Quickly view all the APs present in the environment and see critical
parameters for each one, including signal level, signal/noise ratio, security
type, and channel. Find common issues, such as incorrect security type, poor
signal coverage, or incorrect channel. (Figure 3)
Sort or filter by any parameter, then drill into any AP to set its authorization
level and see more details, including number of connected clients, supported
rates, 802.11n/ac/ax capabilities and more. From the AP details page, drill into
a list of connected clients, or the channel on which the AP operates, to verify
any channel utilization or co-channel interference problems.
From here you can also use a locator tool to find an AP, set Access Control
status (ACL), or you can perform a packet capture.
Network Discovery
Quickly view all the networks present in the environment and see critical
parameters for each one, including signal level, signal/noise ratio, security
type, and number of access points. Find common issues such as mixed
security types, poor signal coverage, or lack of secondary AP coverage.
Sort or filter by any parameter, then drill into greater detail on any network,
including 802.11 types supported, number of connected clients, channels, and
more. From the network details page, drill into a list of APs or clients on the
network.
Wired Ethernet Tests
The AirCheck G2’s built-in Ethernet test validates that APs have a working back
haul connection to the network.
• Diagnose and test Power-over-Ethernet (PoE), link to the switch, DHCP,
Gateway, and Internet connections.
• Get VLAN, switch name, and port information via CDP/LLDP/EDP for your
managed switches.
AirMapper
™
Site Survey App
With the AirMapper app, AirCheck G2 users can quickly and easily gather location-based Wi-Fi
measurements and create visual heat maps of key performance metrics in the Link-Live Cloud
Service or AirMagnet Survey PRO. Simple to use, the AirMapper app is ideal for quick site surveys
of new deployments, change validation, and performance verification.
• Complete faster and easier Wi-Fi site surveys with an entirely mobile platform
• Perform enterprise-grade surveys without the need of a dongle or tethered device
• Collaborate—easily visualize and share survey data through Link-Live Cloud Service or
AirMagnet Survey PRO
• Active Survey tests the actual experience that a client device would encounter, including how
eective roaming is working in the environment
AirMapper
TM
Site Survey App
Network List
Ethernet Test Results
NOTE: Enhanced site survey visualizations and filtering are available to
customers with AllyCare support on their AirCheck G2. For information
about AllyCare, go to support.netally.com/allycare/
PRODUCT SUPPORT