- Netac Tech. Co. Ltd. Portable Multimedia Player User's Manual P200

ManualsBrandsNetac Tech ManualsPortable Multimedia PlayerNetac Tech. Co. Ltd.

Notice

This manual contains information protected by copyright law. All rights are reserved. No

part of this document may be used or reproduced in any form or by any means, or stored

in a database/retrieval system without prior written permission from Netac Technology

Co., Ltd.

Netac provides the repair service during warranty period in promised support range. This

product is not guaranteed for its compatibility with all kinds of computers and Operating

System. Netac Technology Co., Ltd. is not responsible for any loss arising out of using this

product. The governing laws for this product are laws of the People’s Republic of China.

Netac reserves the rights to update user’s manual based on the application upgrade

without prior notice. All changes will be put into the new edition manual. Please visit

website http://www.netac.com to download the latest user’s manual.

Summary of content (29 pages)

PAGE 1
Notice This manual contains information protected by copyright law. All rights are reserved. No part of this document may be used or reproduced in any form or by any means, or stored in a database/retrieval system without prior written permission from Netac Technology Co., Ltd. Netac provides the repair service during warranty period in promised support range. This product is not guaranteed for its compatibility with all kinds of computers and Operating System. Netac Technology Co., Ltd.
PAGE 2
iMuve C) Remarks 1) A) B) C) 2) Don’ t use chemicals, such as gasoline or other diluents, upon iMuve surface. Wipe the iMuve with a dry, soft cloth to keep in clean condition. Please disconnect iMuve from the computer before maintenances or cleaning. F) 5) Others A) It’ s suggested that don’t delete the following system folder for better management files, the details are as the following: NOTE: “Auto-generated default titles” can’t be delete or cut in “File” menu.
PAGE 3
iMuve Catalog Listing 4. Mode Operations .................................................................................... 16 2.1 Utilities Installation .................................................................................. 5 2.2 Data Transferring .................................................................................... 7 2.3 Disconnecting ........................................................................................ 8 4.1 Keystroke ....................................
PAGE 4
iMuve 1. Introduction Thanks for purchasing Netac iMuve (P200). P200 is a new type of portable media player, which perfectly combines digital Movie & Music Playing, Photo browse, Game, eBook, FM radio, FM Out, FM Recording, MIC Recording, Line In Recording, and Removable hard disk. Support multitasking that you can browse photo or eBook while listening music or FM program. 1.
PAGE 5
iMuve 1.3 Functions and Buttons 17 18 19 Top Front 1 2 3 4 5 6 8 9 10 11 12 7 13 Bottom 20 Right Left Back 14 16 22 15 21 1. Rope Hole 2. REPEAT Button 3. Buckup Button 5. FM OUT Button 9. Previous Button 13. LED 6. MENU Button 10. Volume+ Button 14. Backstop 7. MIC 8. Volume- Button 11. Next Button 12. OK Button 15. RESET Hole (Below the backstop) 3 23 4. BACK Button 16. Speaker 17. POWER Button 18. LCD Button 19. SD/MMC Card Slot and Mini USB Port 20. HOLD Switch 21.
PAGE 6
iMuve 2. Usage on the Computer P200 has two styles as “Fashion”and “Classic”, this manual would be introduced as “Fashion”for example. Connect P200 with the computer through USB cable, Connect standard port of USB cable with the computer, Mini port with P200. After being connected, the screen of P200 would displayed as following: 4) Please select “Search for the best driver for your device. (Recommended)”, and click “Next”button to continue. 5) Wizard shows where to locate P200 driver.
PAGE 7
iMuve Mac OS 9.0 or above (Mac OS 10.3.2 e.g.): You would find two new icons named “NO_NAME”that would appear on the desktop of your computer, and the first icon represents P200, the second icon represents SD/MMC Card. NOTE: Under the system of Mac OS 10.3.2 or above, only one disk letter would appear, if SD/MMC Card is not plugged into P200. 6) System would automatically detect the driver.
PAGE 8
iMuve 1) Windows 98/98SE: Unplug P200 from USB port of the computer after stop transferring. Windows Me/2000/XP/Server 2003 (Windows 2000 e.g.): Click the icon at the 2) taskbar, then click the “Stop USB Mass Storage Device - Driver”, and click “OK” button in the pop-up window “The ‘ USB Mass Storage Device’device can now be safely removed from the system”, then you can unplug P200 from the computer safely. 3. Basic Operations 3.1 Battery : The battery is full. : The battery is exhausted.
PAGE 9
iMuve 3.2 Power On/Off 3.4 SD/MMC Card To power on P200, please hold POWER button, P200 would enter main menu automatically. To power off P200, please hold POW ER button. If you set “Time Off”, P200 would power off automatically when the time duration exceeds the setup time. When P200 is in non playing/playing pause/receiving/recording/playing game modes, P200 would power off automatically if you set “Auto Off”and there is no operation during the time (Please refer to “4.11 Setup”for details).
PAGE 10
iMuve 3.5 HOLD 3.7 Firmware Upgrade This function is used to prevent the buttons from being operated accidentally. To lock all buttons please simply lock HOLD switch, a lock icon would appear on the screen, and no button would be able to operate. To release the lock status, please unlock HOLD switch. If try to power on while HOLD switch is locked, P200 would power off automatically shortly after displaying “Keys locked, please set the HOLD switch to unlock”, please unlock HOLD switch, then try again.
PAGE 11
iMuve 4. Mode Operations There are 10 menus in main menu: Movie, Music, Photo, Game, eBook, FM, Recorder, Accessories, File, and Setup. 4.1 Keystroke 1) Press Previous/Next button to select the menu in main menu, and press OK button to enter. 2) Press MENU button to enter popup menu in main menu, press Previous/Next button to select item, and press OK button to enter. 3) Press BACK button to return to previous menu. 4) Press LCD button to turn on/off screen. 5) Press MENU button to exit popup menu.
PAGE 12
iMuve 4.2 Movie Press Previous/Next button to select “Movie”in main menu, and press OK button to enter. 1) Press Previous/Next button to select folder, press OK button to enter. 2) Press Previous/Next button to select movie file, and press OK button to play, or press MENU button to enter popup menu, and press Previous/Next button to select “play”to play movie. 6) Press MENU button to display information of playing file. 7) Press BACK/POWER button to return to “Movie”menu.
PAGE 13
iMuve 1. Information of track 2. Play Status Play 3. Lyric Shows 4. A-B Repeat 5. Track No./Total Track No. 6. Equalizer NOR: Normal 7. Play Mode Pause BAS: Bass ROC: Rock CLA: Classic : Play One 8. Repeat Mode : Repeat : Repeat Offf 9. Play Order : Sequence 2) 3) 4) 5) 6) 7) 19 11.
PAGE 14
iMuve 10) Multitasking: A) Enter to “Photo/eBook”menu for browse. B) Enter to “File”menu for viewing the information. C) Enter to “Setup”menu for setting items of system. D) Enter to “Accessories”menu for viewing the calendar. Press MENU button to enter popup menu of “Photo/eBook/File/Accessories”, press Previous/Next button to select item (please refer to “Photo/eBook/File/Accessories” for details).
PAGE 15
iMuve Left-Right: Press Previous/Next button to left/right shift. Rotate: Press Previous/Next button to counterclockwise/clockwise rotation with 90°. Slide Show/Manu View: Press OK button to select display mode. Return: Return to main menu. NOTE: If the resolution of the photo is less than 320 X 240 pixels, the photo would be displayed with original size in the middle, otherwise, the photo would be displayed compression size with full screen. 6) Press BACK button to return to previous menu.
PAGE 16
iMuve 3) 4) Normal Screen 5) PressBACK button to return to previous menu. Press Previous/Next button to page up/down, and press OK button to switch normal screen to full screen. Press MENU button to enter popup menu, press Previous/Next button to select item, and press OK button to confirm. Label Full Screen 25 A) Full Screen: Switch to display modes of the text. This item would display “Normal Screen”while in “Full Screen”status. B) Set as label: Insert label in current page.
PAGE 17
iMuve C) Go to label: Display the page that has set label. D) Remove Label: Remove the label from current text. E) Return: Return to main menu. 6) Multitasking: If you browse eBook while listening music, you can press MENU button to enter popup menu, and press Previous/Next button to select “Stop/Previous/Next”. 4.7 FM Press Previous/Next button to select “FM”in main menu, press OK button to enter. Press BACK button or press MENU button to enter popup menu to select “Return”to main menu.
PAGE 18
iMuve Press MENU button to enter popup menu in receiving status, press Previous/Next button to select item, and press OK button to set item or confirm. 1) 29 Scan Mode: Manual, Auto, and Channel. You can press OK button to select. Manual: Press Previous/Next button to search channel ahead/backwards by 0.1MHz manually in receiving status. Auto: Press Previous/Next button, P200 would search channel ahead/backwards by 0.1MHz automatically. P200 would stop searching automatically while searched channel.
PAGE 19
iMuve E) Enter to “Accessories”menu for viewing the calendar. Please refer to “Photo/eBook/File/Recorder/Setup/ Accessories”for details. 4.8 Recorder Press Previous/Next button to select “Recorder”in main menu, press OK button to enter. 1) Press MENU button to enter popup menu, press Previous/Next button to select item, the details are as the following: 2) C) Storage Site: Press OK button to select storage site as “Flash”or “SD/MMC”. D) Play: Play the select recorded file. E) Return: Return to main menu.
PAGE 20
iMuve B) 3) Press POWER button to stop playing in playing status, or press MENU button to enter popup menu, press Previous/Next button to select “Stop”, and press OK button to confirm. C) Press OK button to start playing in stop status. D) Press Volume+ / Volume- button to turn up/down the volume. E) Press BACK button to return to previous menu. Recording: A) MIC recording: Please set the recording source as “MIC”at first, then you can recording through the MIC of P200.
PAGE 21
iMuve P200 can name and save for the recorded files automatically when finish recording. The details are as the following: Recorded Mode MIC Recording FM Recording Line In Recording Name of Recorded files Locations for Saving Mic****-****** “Recorder”folder under root of Fm****-****** SD/MMC Card or built-in Flash. Lin****-****** 2) Press MENU button to enter popup menu. Playing Menu “Music”and “Recorder” menu 4.
PAGE 22
iMuve 3) Multitasking: If you browse calendar while listening music, you can press MENU button to enter popup menu, and press Previous/Next button to select “Stop/Previous/Next”. 2) 3) 4.10 File Press Previous/Next button to select “File”in main menu, press OK button to enter. Then you can copy, delete or edit data in P200 and SD/MMC Card. 1) Press Previous/Next button to select folder, press OK button to enter. 37 Press Previous/Next button to select item, press OK button to enter.
PAGE 23
iMuve 5) Multitasking: P200 supports multitasking in “File”menu that you can view the “File”menu while listening music. You can press MENU button to enter popup menu, and press Previous/Next button to select “Stop/Previous/Next”. A) Copy: Press OK button to confirm. You can press BACK button to return to previous menu, and press Previous/Next button to select location where you want to save. Press MENU button to enter popup menu, press Previous/Next button to select “Paste”to confirm.
PAGE 24
iMuve Items Descriptions Set the language as 中文 and English. Set the style as Fashion and Classic. Press OK button to enter sub menu. Press Previous/Next button to select item, press OK button to enter. Press Previous/Next button to set, press OK button to confirm. To set the continuous illumed time of backlight if there is no operation exceed the time Backlight which is set as 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60 seconds and AlwaysOn. “AlwaysOn”represents the backlight is on anytime.
PAGE 25
iMuve 5. FM Transmission Items Descriptions FM Out Upgrade To set the earphone whether has sound when FM outing: Soundable, Silent. Browse the upgrade information, press BACK or OK button to return to “Setup”menu. To browse the system information, which includes Company, name and type of product, hardware and firmware version, available and total capacity of flash, and SD/MMC Card status. Press BACK or OK button to return to “Setup”menu.
PAGE 26
iMuve C) D) E) F) 4) 45 Exit Press Volume+/Volume- button to adjust the frequency, till the transmitting frequency of P200 is same as the frequency of FM radio of car. Now you can enjoy the music in P200 through FM radio of car. Please refer to “4.3 Music”for details, except for the Volume+/Volumebutton, please turn up/down the volume through the stereo set of car. Please refer to “4.
PAGE 27
iMuve Items 7. Specifications *The actual usable capacity may not be identical as labeled. Netac reserves the rights to make changes on any specification without prior notice. Items Descriptions Dimension Net Weight Capacity of memory * Capacity of SD/MMC Card Power Supply 133.7mm x 78mm x 21mm 195g approximately 256MB~ 2GB 16MB~ 2GB Powered by built-in lithium battery.
PAGE 28
iMuve 8. FAQ 9. RMA Service If you experience any of the following difficulties in using P200, use the following guide for help. Should any problem persist, contact with Netac Customer Service. 1) Symptoms Fail to power on. Power off shortly while power on. No sound output. Keystroke void. Fail to connect with the computer. Possible Reasons Analysis Low Power. Low Power. HOLD switch locked. The volume is 0. Earphone isn’ t connected well. HOLD switch locked. USB Cable isn’ t connected correctly.
PAGE 29
iMuve ANY RETURN WITHOUT PRE-APPROVED RMA NUMBER WILL BE REJECTED OR DELAYED. IT IS A MUST-HAVE FOR ALL RETURN OR REPAIRING OR EXCHANGE OR MISSING ISSUES. 3) 4) 51 How to send the defective product(s) to Netac? The “Netac RMA Request Form”must NOT be enclosed in the RMA package sent to Netac, but the RMA number is REQUIRED to be written on the top of the box when you send it/them back. The defective product(s) sent to Netac without RMA number will NOT be received, repaired and/or returned.