SDS

Primary Routes(s) of Exposure: These chemicals are contained in a sealed enclosure. Risk of exposure occurs
only if the cell or pack is mechanically, thermally, electrically or physically abused to the point of compromising
the enclosure.
If this occurs, exposure to the electrolyte solution contained within can occur by inhalation, ingestion, eye contact
and skin contact.
Potential Health Effect(s):
Acute (short term): see Section 8 for exposure controls.
In the event that this cell or pack has been ruptured, the electrolyte solution contained within the cell would be
corrosive and can cause burns to skin and eyes.
Inhalation: Inhalation of materials from a sealed cell is not an expected route of exposure. Vapors or mists
from a ruptured cell may cause respiratory irritation.
Ingestion: Swallowing of materials from a sealed cell is not an expected route of exposure. Swallowing the
contents of an open cell can cause serious chemical burns to mouth, esophagus, and gastrointestinal tract.
Skin: Contact between the cell and skin will not cause any harm. Skin contact with the contents of an open cell
can cause severe irritation or burns to the skin.
Eye: Contact between the cell and the eye will not cause any harm. Eye contact with the contents of an open
cell can cause severe irritation or burns to the eye.
CHRONIC (long term): see Section 11 for additional toxicological data.
Interactions with other chemicals: Immersion in high conductivity liquids may cause corrosion and breaching
of the cell or battery enclosure. The electrolyte solution inside of the cells may react with alkaline (basic)
materials and present a flammability hazard.
Potential Environmental Effects: Not Available.
3. Composition/information on ingredients
Hazardous components
Because of the cell structure the dangerous ingredients will not be available if used properly.
During charge process a lithium graphite intercalation phase is formed.
Portion Material Name CAS NO. Weight (%)
Positive electrode Lithium nickel oxide 12031-65-1 20~60
Positive electrode’s base Aluminum 7429-90-5 1~10
Negative electrode Graphite 7782-42-5 10~30
Negative electrode’s
base
Copper 7440-50-8 1~15
Electrolyte
Dimethyl carbonate 616-38-6 5~25
Ethylen carbonate 96-49-1 5~25
Lithium hexa flourophosphare 21324-40-3 5~25
Outer case Iron 7439-89-6 1~30