SDS

Safety Data Sheet
Date of Issue: 18-Jan-2015 File No.: HP-SDS-2015-A02
Page 2 of 8
This sheet is provided as technical information only. The information and recommendations set forth are made in good faith and
believed to be accurate as of the date of preparation. Hong Kong Highpower Technology Co., Ltd make no warranty, expressed or
implied, with respect to this information and disclaims all liabilities from reliance on it.
Eye touch
Contact with battery electrolyte may cause burns. Eye damage is possible.
Inhalation
Inhalation of a large number of vapors or fumes released due to heat may cause respiratory.
Ingestion
Ingestion of battery contents may cause mouth, throat and intestinal burns and damage.
Unknown Toxicity
No information available.
3. Composition/ Information on Ingredients
Chemical Name Molecular formula CAS No. Concentration
Lithium nickel oxide LiNiO
2
12031-65-1 10%
Lithium Cobalt oxide CoLiO
2
12190-79-3 10%
Lithium Manganese oxide LiMn
2
O
4
12057-17-9 20%
Polyvinylidene fluoride CH
2
CF
2
n 24937-79-9 2%
Graphite powder C 7782-42-5 30%
Lithium
Hexafluorophosphate
LiPF
6
21324-40-3 20%
Polyethylene C
2
H
4
n 9002-88-4 0.5-5%
Copper foil Cu 7440-50-8 10%
Nickel Nickel 7440-02-0 0.5-5%
Aluninum foil Al 7429-90-5 0.5-5%
PVC (C
2
H
3
Cl)x 9002-86-2 0.5-5%
4. First Aid Measures
General Advice
First aid is Applicable only in the case of cell rupture.
Skin Contact:
Washing immediately with plenty of water and soap for at least 15 minutes. In the case of skin irritation or
allergic reaction see a physician.
Eye contact:
If symptoms persist, call a physician. Rinse immediately with plenty of water, also under the eyelids, for at least
15 minutes. Keep eye wide open while rinsing. Remove contact lenses, if present and easy to do. Continue
rinsing. Do not rub affected area.
Inhalation of Vented Gas:
Remove to fresh air. If symptoms persist, call a physician. Get medical attention immediately if symptoms
occur.
Ingestion: