Installation Guide for Link Aggregator Tap 10/100 In-Line to GigaBit with SFP Monitor Ports Doc. PUBLAIF4CU4SFPU Rev.
10/100 In-Line Link Aggregator Tap Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Key Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Application Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10/100 In-Line Link Aggregator Tap PLEASE READ THESE LEGAL NOTICES CAREFULLY. By using a Net Optics Tap you agree to the terms and conditions of usage set forth by Net Optics, Inc. No licenses, express or implied, are granted with respect to any of the technology described in this manual. Net Optics retains all intellectual property rights associated with the technology described in this manual. This manual is intended to assist with installing Net Optics products into your network.
10/100 In-Line Link Aggregator Tap Introduction Thank you for choosing the most versatile monitoring Tap available today. Net Optics Link Aggregator Taps are an efficiency breakthrough for passively monitoring multiple full-duplex links. Whether you are a novice or an expert, this installation guide is designed to help answer any questions and to provide a quick set-up reference. Net Optics Link Aggregator Tap provides superior monitoring coverage while leveraging monitoring resources.
10/100 In-Line Link Aggregator Tap Key Features Passive, Secure Technology • Supports full-duplex monitoring of four links with a single NIC, increasing monitoring efficiency • Optional Regeneration Tap technology enables up to four devices to simultaneously monitor all aggregated traffic • Unique Zero Delay™ technology ensures no packet delay or loss if power is lost to the Tap • Provides complete full-duplex visibility at 10 or 100 Mbps without data stream interference or introducing a point of failure •
10/100 In-Line Link Aggregator Tap Link Diagram Aggregator Application Tap Implementation 10/100 In-Line Link Aggregator Tap GigaBit SX Monitoring Device 1 GigaBit SX Monitoring Device 2 Switch Switch Switch Switch Finance HR Figure 1: Application Diagram Zero DelayTM - A Net Optics Breakthrough Highly sensitive network locations can improve monitoring performance via the innovative features of Net Optics Taps.
10/100 In-Line Link Aggregator Tap Unpacking and Inspection Carefully unpack the 10/100 In-Line Link Aggregator Tap and check for damaged or missing parts. The Link Aggregator Tap ships with the following: • 10/100 In-Line Link Aggregator Tap • Two power cords • Installation Guide In addition to the Port Aggregator, you should have ordered at least one SFP module. You may have also ordered an extended warranty. Carefully check the packing slip against parts received.
10/100 In-Line Link Aggregator Tap LED Indicators • PWR 1/ PWR 2: Main and Redundant Power. If the Tap is deployed with both power supplies, both LEDs illuminate when the Tap is plugged in. If an LED is off, this indicates that the corresponding power supply is not connected or not functioning. • Activity Indicator: When there is activity on the link, LED flashes green. • Link Indicator: When a good link is established, the LED is a solid green. Connecting to the Network To connect to the network: 1.
/100 In-Line Link Aggregator Tap NOTE:______________________________________________________________ At 10Mbps, if any of the network links are unplugged during operation, it will be necessary to restart traffic from the connected network devices upon re-connecting to the Link Aggregator. This is to ensure that traffic is properly copied to the monitor ports and only applies to networks running at 10Mbps.
10/100 In-Line Link Aggregator Tap Note:_______________________________________________________________ The 10/100 Link Aggregator is shipped with the following default dip-switch settings. It is strongly recommended that you do not make any changes to these settings, except when needed, and only to switches 2,4,5 and 6. If Switch 3, for example, is toggled to "on," the Link Aggregator will not get a valid link.
10/100 In-Line Link Aggregator Tap Specifications Environment Operating Temperature: 0˚C to 55˚C Storage Temperature: -10˚C to 70˚C Relative Humidity: 10% min, 95% max, non-condensing Power Power Supply Input: 100-240VAC, 0.5A, 47-63Hz DC Power Input: -48 VDC typical, -36 VDC min, -75 VDC max Mechanical Dimensions: 1.75” high x 17.
10/100 In-Line Link Aggregator Tap Limitations on Warranty and Liability Net Optics offers a limited warranty for all its products. IN NO EVENT SHALL NET OPTICS, INC. BE LIABLE FOR ANY DAMAGES INCURRED BY THE USE OF THE PRODUCTS (INCLUDING BOTH HARDWARE AND SOFTWARE) DESCRIBED IN THIS MANUAL, OR BY ANY DEFECT OR INACCURACY IN THIS MANUAL ITSELF.
10/100 In-Line Link Aggregator Tap Notes: 10
www.netoptics.com © 2008 by Net Optics, Inc. All Rights Reserved.
