User Manual

Fiber Mode Converter
2
Key Features
Passive, Secure Technology
• Net Optics’ Fast Ethernet FMC series converters are 100Base-FX to
100Base-FX converters. The units comply with all applicable IEEE 802.3u
specications.
• The FMC series converters are designed to be simple plug-and-play prod-
ucts. Just plug the multimode or single mode ber optic connectors into the
appropriate port and the conversion is done.
• Provides transparent conversion at 100 Mbps without data stream interfer-
ence or introducing a point of failure
• Link Fault Signaling provides critical link status information
• Clock and Data Recovery (CDR) control overall jitter when deploying
converter pairs
• Compatible with all 100Base-FX singlemode and multimode bers
• Fully RoHS compliant
Ease of Use
• LED indicators show link status and redundant power
• Front-mounted connectors support easy installation and operation
• Optional 19-inch rack frames hold up to 3 or 12 Taps
• Tested and compatible with all major manufacturers’ monitoring devices,
including protocol analyzers, probes, and intrusion detection/prevention
systems
Support
• Net Optics offers free technical support throughout the lifetime of your
purchase. Our technical support team is available from 8 am to 5 pm Pacic
Time, Monday through Friday at [phone] and via email at ts-
[e-mail]. FAQs are also available on Net Optics website at
www.netoptics.com.