Instruction Manual

10
4 Station Bypass Switch with Heartbeat
To display the current packet:
1. Type e and press Enter. The packet is displayed as shown in the example
below.
packet length = 78
MAC DA 00 50 c2 3c 60 00
MAC SA 00 50 c2 3c 60 01
Packet Type 08 00
45 00 00 3c 18 d2 00 00
80 01 0a  0a 02 01 dc
0a 01 01 12 08 00 37 5c
02 00 14 00 61 62 63 64
65 66 67 68 69 6a 6b 6c
6d 6e 6f 70 71 72 73 74
75 76 77 61 62 63 64 65
66 67 68 69
CRC bb 8e 1c a9
To show port status:
1. Type f and press Enter. Port status for the device is displayed.
Port A Link
Port B Link
Port C Link
Port D Link
To set the Bypass Switch name:
1. Type g and press Enter.
Input 8 Char name:
2. Give the Bypass Switch a name and press Enter
To restore the bypass switch to factory defaults:
1. Type z and press Enter. You are prompted to select which type of packet
you want to restore, IP or IPX.
2. Select 1 to restore defaults with an IP packet or 0 to restore defaults with
an IPX packet.