Installation Guide for 10/100BaseT Tap Doc. PUBTPCUU Rev.
10/100BaseT Tap Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Key Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Unpacking and Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10/100BaseT Tap PLEASE READ THESE LEGAL NOTICES CAREFULLY. By using a Net Optics Tap you agree to the terms and conditions of usage set forth by Net Optics, Inc. No licenses, express or implied, are granted with respect to any of the technology described in this manual. Net Optics retains all intellectual property rights associated with the technology described in this manual. This manual is intended to assist with installing Net Optics products into your network.
10/100BaseT Tap Introduction Net Optics 10/100BaseT Taps supply mission-critical networks with superior network visibility and security access. The breakthrough design of the Net Optics 10/100BaseT Tap ensures zero impact on network traffic while maintaining uninterrupted access for monitoring and security devices. These are the world’s first and only 10/100BaseT Taps offering “zero delay” technology.
10/100BaseT Tap Key Features Passive, Secure Technology • Provides passive access at 10 or 100 Mbps without data stream interference or introducing a point of failure • Unique Zero Delay technology ensures no packet delay or loss if power is lost to the Tap • Compatible with Power over Ethernet (PoE) applications • Passes all full-duplex traffic (including errors) from all layers for comprehensive troubleshooting • No IP address is needed for the Tap or monitoring device, enhancing monitoring security • R
10/100BaseT Tap About This Guide This guide explains how to install the 10/100BaseT Tap. Please read the Guide before attempting to install the 10/100BaseT Tap. This guide covers the following models: Model TP-CU Unpacking and Inspection Carefully unpack the 10/100BaseT Tap and check for damaged or missing parts.
10/100BaseT Tap Product Diagrams Network A & B A Network B Monitor A & B A Power LEDs Monitor B 10/100 Ethernet Tap 2 1 www.netoptics.com Figure 1: Front Panel 12V DC OUTPUT PIN ASSIGNMENT + 1.5 Amp max. 1 2 Figure 2: Rear Panel AC Power Model - + - + - + - + Figure 3: Rear Panel DC Power Model LED Indicators • PWR 1/ PWR 2: Main and Redundant Power. If the Tap is deployed with both power supplies, both LEDs illuminate white when the Tap is connected to power.
10/100BaseT Tap Cabling Guidelines • If connecting to Switches or Hubs, use CAT5 RJ45 cross-over cabling. • If connecting to Routers or NICs, use CAT5 RJ45 straight-through . cabling. Connecting to the Network 1. Connect Network Port A to the appropriate switch, server or router using a CAT5e cable. 2. Connect Network Port B to the appropriate switch, server or router using a CAT5e cable. A Network B A Monitor B 10/100 Ethernet Tap 2 1 www.netoptics.
/100BaseT Tap Connecting to the Monitoring Device 1. Supply power to the Tap using the two redundant power supplies included with the unit. Verify that the Power LED illuminates. 2. Connect Monitor Port A to the appropriate port on the monitoring device using a CAT5e straight-through cable. 3. Connect Monitor Port B to the appropriate port on the monitoring device using a CAT5e straight-through cable.
10/100BaseT Tap Specifications Environment Operating Temperature: 0˚C to 40˚C Operating Temperature: -10˚C to 70˚C Relative Humidity: 10% min, 95% max, non-condensing Power Power Supply Power Supply Input: 100-240VAC, 0.5A, 47-63Hz Output: 12V 1.5A Input: -48V DC typical, -36V DC min, -75V DC max Mechanical Dimensions: 1.125” high x 4.25” deep x 4.
10/100BaseT Tap Limitations on Warranty and Liability Net Optics offers a limited warranty for all its products. IN NO EVENT SHALL NET OPTICS, INC. BE LIABLE FOR ANY DAMAGES INCURRED BY THE USE OF THE PRODUCTS (INCLUDING BOTH HARDWARE AND SOFTWARE) DESCRIBED IN THIS MANUAL, OR BY ANY DEFECT OR INACCURACY IN THIS MANUAL ITSELF.
10/100BaseT Tap Notes: 9
10/100BaseT Tap Notes: 10
www.netoptics.com © 2009 by Net Optics, Inc. All Rights Reserved.
