Owner manual

10/100 to Triple-speed Port Aggregator
5
Product Diagrams
Figure 1: Front Panel
®
www.netoptics.com
1
2
Port Aggregator
1
Network Monitor
2
A B
10
100
1000
LINK
ACT
In-Line
Power LEDs
Monitor Ports
1 & 2
Network Ports
A & B
LED Indicators
• 1 / 2: Main and Redundant Power. If the Tap is deployed with both power
supplies, both LEDs will illuminate when the Tap is plugged in. If an LED
is off, this indicates that the corresponding power supply is not functioning.
• Link Speed Indicator: Located in the upper left corner of each RJ45 con-
nector. It illuminates solid amber for a 10Mbps link, yellow for a 100Mbps
link, and green for a 1000Mbps link.
• Link/Activity Indicator: Located in the upper right corner of each RJ45
connector. If a good link is established, the LED illuminates a steady green.
If there is current activity on this link, the LED ashes.