Owner manual

10/100 to Triple-speed Port Aggregator

About This Guide

This guide explains how to install the 10/100 to Triple-speed Port Aggregator.

Please read this Guide before attempting to install the equipment.

This guide covers the following model: Model TPA-CU.

Unpacking and Inspection

Carefully unpack the 10/100 to Triple-speed Port Aggregator and check for

damaged or missing parts. The Tap ships with the following:

• 10/100 to Triple-speed Port Aggregator (TPA-CU)

• Two power supplies

• Two network cables

• Two monitor cables

• Installation Guide

You may have also ordered a one-rack-unit panel for mounting two Taps and an

extended warranty. Carefully check the packing slip against parts received. If any

part is missing or damaged, contact Net Optics Customer Service immediately.