Installation Guide for Gig Zero Delay™ Tap and 10/100/1000BaseT Tap 800-0150-001 Rev.
Gig Zero Delay Tap PLEASE READ THESE LEGAL NOTICES CAREFULLY. By using a Net Optics Tap you agree to the terms and conditions of usage set forth by Net Optics, Inc. No licenses, express or implied, are granted with respect to any of the technology described in this manual. Net Optics retains all intellectual property rights associated with the technology described in this manual. This manual is intended to assist with installing Net Optics products into your network.
Gig Zero Delay Tap Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Key Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Unpacking and Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Product Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gig Zero Delay Tap & 10/100/1000BaseT Tap Introduction Get total traffic visibility for 10/100/1000 monitoring and security devices by placing Net Optics Gig Zero Delay Taps and 10/100/1000 BaseT Taps on critical network links. These Taps support passive monitoring of 10/100/1000 links at 10, 100, or 1000 Mbps. “Passive” means that network traffic continues to flow even when the Tap does not have any power.
Gig Zero Delay Tap & 10/100/1000BaseT Tap Simply Plug It In Full-duplex monitoring is a snap when each side of the signal is sent to a separate NIC on the monitoring device. All network and monitoring cables necessary for plug-and-play deployment are included with the Tap. Security and Visibility Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks.
Gig Zero Delay Tap & 10/100/1000BaseT Tap Key Features Passive, Secure Technology • Provides passive access at 10/100/1000 Mbps without data stream interference or introducing a point of failure • Unique Zero Delay technology ensures no packet delay or loss if power is lost to the Tap • Permanent in-line installation without affecting network performance • Link Fault Detect prevents undetected link failures • Passes all full-duplex traffic (including errors) from all layers for comprehensive troubleshooti
Gig Zero Delay Tap & 10/100/1000BaseT Tap About This Guide This guide explains how to install the Gig Zero Delay Tap and the 10/100/1000BaseT Tap. Please read the Guide before attempting to install the device.
Gig Zero Delay Tap & 10/100/1000BaseT Tap Product Diagrams Network A & B Monitor A & B Power LEDs Network A B A Monitor B Zero Delay ® 10 LINK 100 ACT 1000 2 1 www.netoptics.com Figure 1: Front Panel, Gig Zero Delay Taps (TP-CU3-ZD, TP-CU3-ZD-DC) Power LEDs Network A & B A B Monitor A & B A B Full Duplex Tap ® 10 LINK 100 ACT 1000 2 1 Network www.netoptics.
Gig Zero Delay Tap & 10/100/1000BaseT Tap DC Terminal Blocks Model TP-CU3-DC has screwless terminal blocks for DC power. Push in the orange button to open the socket, insert the power wire, and release the button to clamp the wire into the socket. Model TP-CU3-ZD-DC has a two piece, screw-type terminal blocks for DC power. you can unplug half of the terminal block for convenience when connecting the power wires. Just pull to unplug the removable part, and push it back in to reconnect it.
Gig Zero Delay Tap & 10/100/1000BaseT Tap LED Indicators • Power Indicator: Current power source LED illuminates white. • Link/Activity Indicator: Located in the upper right hand corner. If a good link is established, the LED illuminates. If there is current activity on this link, the LED flashes. • 10/100/1000 Indicator: Located in the upper left hand corner. If the Port is set to 10 Mbps, the LED illuminates orange. If the Port is set to 100 Mbps, the LED illuminates yellow.
Gig Zero Delay Tap & 10/100/1000BaseT Tap The Gig Zero Delay Taps and 10/100/1000BaseT Taps support Automatic MDI/MDI-X Configuration on all of its ports. However, when the Tap does not have power, it passively connects the two network ports so the link remains active. This passive connection is made straight-through.
Gig Zero Delay Tap & 10/100/1000BaseT Tap Connecting to the Monitoring Device To connect the Tap to the Monitoring device: 1. Supply power to the Tap using the two redundant power supplies included with the unit. Verify that the Power LED illuminates. Note: ________________________________________________________________ The second power supply is available to support the flow of traffic to the monitoring device in the event that the first power supply becomes unavailable.
Gig Zero Delay Tap & 10/100/1000BaseT Tap DIP Switch Settings The 8-position DIP switch located on the rear panel or the side of the device sets its communication parameters, as specified in the following table. Note: ________________________________________________________________ The settings apply to all ports on the Tap (except for Switch 1, Link Fault Detect, which applies only to the Network Ports). If you use fixed settings, connected devices must match the settings you select for the Tap.
Gig Zero Delay Tap & 10/100/1000BaseT Tap Specifications Environment Operating Temperature: 0˚C to 40˚C Storage Temperature: -10˚C to 70˚C (TP-CU3 and TP-CU3-DC) -10˚C to 45˚C (TP-CU3-ZD and TP-CU3-ZD-DC) Relative Humidity: 10% min, 95% max, non-condensing Power Power Consumption, TP-CU3-ZD and TP-CU3-ZD-DC Maximum: 30 watts Typical: 8 watts Power Supply Input: 100-240VAC, 0.5A, 47-63Hz Output: 12V 1.
Gig Zero Delay Tap & 10/100/1000BaseT Tap Limitations on Warranty and Liability Net Optics offers a limited warranty for all its products. IN NO EVENT SHALL NET OPTICS, INC. BE LIABLE FOR ANY DAMAGES INCURRED BY THE USE OF THE PRODUCTS (INCLUDING BOTH HARDWARE AND SOFTWARE) DESCRIBED IN THIS MANUAL, OR BY ANY DEFECT OR INACCURACY IN THIS MANUAL ITSELF.
www.netoptics.com © 2010 by Net Optics, Inc. All Rights Reserved.
