User guide

10/100/1000 Copper Port Aggregator Tap
7
 Connecting to the Network

The network links connected to the 10/100/1000 Copper Port Aggregator must
run with autonegotiation. Be sure to congure the ports on the switches and
rouuters for autonegotiation if you are cabling them to this device.
 

.
1. Unpack.the.Tap.and.verify.that.you.have.all.components.This.Tap.ships.
with.two.power.supplies.and.two.power.cords
2. Connect.Network.Port.A.to.the.appropriate.network.device.using.an.RJ45.
CAT5e.straight-through.cable.
3..Connect.Network.Port.B.to.the.appropriate.network.using.an.RJ45.CAT5e.
straight-through.cable.
4. Verify.that.the.Tap.Network.Ports.are.cabled.in-line.between.two.devices
®
www.netoptics.com
1
2
Port Aggregator
1
Network Monitor
2
A B
10
100
1000
LINK
ACT
In-Line
To network switch or router
To network switch or router