Manual

5
10/100/1000 Bypass Switch
Connecting to the In-line Device
1. Connect Monitoring Port A to the in-line device using a CAT5/CAT5e
cable.
2. Connect Monitoring Port B to the in-line device using a CAT5/CAT5e
cable.
3. Verify that the Monitoring Ports are cabled in-line between two devices.
Figure 3: Connecting to the In-line Device
A B A B
NetworkControl
Monitor
Bypass Switch
10/100/1000
www.netoptics.com
®
To monitoring device B NIC
To monitoring device
A NIC