Manual

4
10/100/1000 Bypass Switch
Cabling Guidelines
10/100 Devices:
• If connecting to Switches or Hubs, use CAT5 cross-over cabling.
• If connecting to Routers or NICs, use CAT5 straight-through cabling.
GigaBit Devices:
• Use CAT5e straight-through cabling.
Connecting to the Network
1. Connect Network Port A to the appropriate switch, server, or router device.
2. Connect Network Port B to the appropriate switch, server, or router device.
3. Verify that the Bypass Switch Network Ports are cabled in-line between
two devices.
Figure 4: Connecting to the Network
A B A B
NetworkControl
Monitor
Bypass Switch
10/100/1000
www.netoptics.com
®
To network switch or routerTo network switch or router