User Guide

ManualsBrandsNestle Nespresso ManualsCoffee MakersNespresso A+GCC1-US-RE-NE VertuoLine Evoluo Coffee & Espresso Maker with Aeroccino Plus Milk Frother, Red (Discontinued Model)

Tip: Use cold, fresh, full-fat or semi-skimmed milk.

PARTS

AEROCCINO +

AEROCCINO 3

PREPARATION

base

jug

lid

remove

sticker

before rst

use

Milk frothing

whisk

(for hot and cold

milk froth)

Hot milk

whisk

(for hot milk)

for hot milk

for milk froth

button

Maximum level indicated:

Preparation Times

Hot milk froth 70 seconds approximately

Cold milk froth 60 seconds approximately

Hot milk 130 seconds approximately

Whisk storage

Main switch

Indication LED

2 whisks

Jug’s maximum level for:

Milk froth 2 Nespresso cappuccino cups

1 Nespresso recipe glass

Hot milk 1 Nespresso recipe glass

TIPS

PREPARATION

6 Press button to start. Aeroccino

stops automatically.

For hot preparations, briey

press button.

For cold milk froth, keep button

pressed for approx. 2 seconds.

5 Pour desired amount

of milk up to one of

the two “max” level

indicators.

Then place milk jug on

to the base.

4 Attach relevant

whisk.

CLEANING AFTER EVERY USE

1 Remove from the base

and take off the whisk

(no tools required).

Note: When you have

nished using Aeroc-

cino 3, switch OFF at

the base with the main

switch.

2 Remove

the seal from the

lid to clean both

parts. Rinse and

clean with

a damp cloth.

3 Jug is

water-

proof,

but NOT

dishwasher

safe.

4 Clip one of the whisks

on to the inner base

of the jug and to avoid

loss, clip the other on

to the lid (or in whisk

storage when using

the Aeroccino 3).

1Underside of the jug must be dry before using the device.

2Plug base into the socket before use. Press main switch located on the base of the

unit to turn on the Aeroccino 3. LED turns green and Aeroccino 3 is ready to use.

3Jug internal side must be cleaned with a cloth suitable for non-stick surfaces.