Installation Guide

ManualsBrandsNestfair ManualsBath2-Handle Floor Mount Roman Tub Faucet with Hand Shower in Chrome

FREESTANDING TUB FAUCET

BEFORE YOU BEGIN

We recommend consulting a professional if you are



accept no liability for any damage to the

faucet, plumbing, sink, counter top, or for personal

injury during installation.

Observe all local plumbing and building codes.

Unpack and inspect the product for shipping damage.

If any damage is found, contact our Customer

Relations team by emailing support

hdteam@aminalife.com

GETTING STARTED

Ensure that you have gathered all the required

materials that are needed for the installation.

TOOLS AND MATERIALS:

Plumbers

Tape

Thread

Sealant

Adjustable

Wrench

Level



(provided)

Drill

Pencil or

Marker

Summary of content (4 pages)

PAGE 1
FREESTANDING TUB FAUCET BEFORE YOU BEGIN TOOLS AND MATERIALS: We recommend consulting a professional if you are unfamiliar with installing plumbing �xtures. We accept no liability for any damage to the faucet, plumbing, sink, counter top, or for personal injury during installation. Observe all local plumbing and building codes. Unpack and inspect the product for shipping damage. If any damage is found, contact our Customer Relations team by emailing support hdteam@aminalife.com .
PAGE 2
FREESTANDING TUB FAUCET INSTALLATION 1. Attach the spout to the faucet body. Insert the spout into the top of the faucet, then tighten the set screw using the provided hex wrench. Conceal the set screw by inserting the provided screw cover. 3. Attach the mounting bracket by threading it onto the base of the faucet. Hand tighten �rmly. Position the faucet at its desired location, then mark the location of the mounting holes on the �oor. Set the faucet aside. Spout Screw Cover Faucet Body 2.
PAGE 3
FREESTANDING TUB FAUCET 5. Remove the nuts, locking washers, and metal washer from each of the mounting screws. Drop each of the screws and anchors into the drilled pilot holes, with the threads facing up through the �oor. 7. Brie�y turn on the main water supply to ensure that there are no leaks. Once you have determined that there are no leaks, turn the water supply back o� and continue with the installation. Threading Facing Up ON 6.
PAGE 4
PROOX FREESTANDING TUB FAUCET 9. Finish your installation by attaching the hand shower to the faucet using the hand shower hose. Hand tighten each connection �rmly. 10. Once installation is complete, turn on the main water supply. Remove the aerator from the spout and turn the faucet on. Allow the water to �ow for 60 seconds to remove any dust or loose sediment within the water lines. Check for any leaks, and that hot and cold water are running appropriately.