Specification

Preparation Before Installation
1.This shower system needs to be installed to the wall, please make sure check all the
size according to the instruction before installation
2.Clean the impurity and sludge in the hose before assembling to avoid leaking
3.Proper Water pressure should between 0.1Mpa-1.0Mpa
4.Turn off the water supply before installation
1. Confirm the location of the concealed
faucet body, then daill two holes on the
wall with percussion drill
2. Install the concealed faucet body
Instruction Manual
Basin Faucet
Product Dimensions Installation drawing
9.055 "
3.937 "
7.087 "
5.118 "