Instructions / Assembly

CARE AND MAINTENANCE
Do not use acids or alkaline cleaning agents.Sharp objects will damage(scratch) the
surface.Wipe the surface with a soft cloth(not be too wet).
NOTICE
*Please make sure that you have all parts indicated before you begin assembly of this item
*This item should be assembled on a soft surface to prevent scratching the finish during assembly
Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
A Plastic drywall anchor 1X
B
Metal screw with attached
decorative knob
1X
PREPARATION
Before beginning assembly of product,make sure all parts are present.
If any part is missing or damaged,do not attempt to assemble the product.
Estimated Assembly Time:5 minutes.
Tools Required for Assembly:Pencil,Electric Drill
Step 1 Step 2
Determine the desired placement of the mirror on the wall.Hold the mirror against Drill hole for anchor using 1/8 inch drill bit.Insert anchor into hole
the wall and mark the hanging point with a pencil. using screwdriver until anchor is flush with wall.
Step 3 Step 4
Insert screw into anchor by holding the knob and turning clockwise.
Place ring around extended knob.