ASSEMBLY INSTRUCTIONS RATTAN BAR SET NOTE: 50% TIGHTEN BEFORE FIXING ALL BOLTS WF285006AAD
1 x Table G 4 x Chair E B I C F J C J A A H D D Notice : 1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a flat ground to adjust and make sure it remains stable. 3. Tighten up all screws with tools gradualy. 4. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process. 5.
Part List A B Chair Leg Frame ( 8pcs ) D C Wood Chair Seat ( 4pcs ) E F Table Leg Frame E ( 1pc ) Mid Chair Frame ( 8pcs ) G Chair Side Frame ( 8pcs ) I H Wood Table Top ( 1pc ) Table Leg Frame F ( 1pc ) Mid Table Frame I ( 1pc ) Mid Table Frame H ( 1pc ) J Short Mid Table Frame ( 2pcs ) Hardware List 1 3 2 Bolt M6 x 40mm 4 pcs + extra 1 pc Bolt M6 x 30mm 16 pcs + extra 2 pcs 5 4 Bolt M6 x 15mm 44pcs + extra 3 pcs Bolt M6 x 25mm 24 pcs + extra 2 pcs 6 W6 x 1 Washers 88pcs + ext
STEP 1(4 x Chairs assembly) STEP 2 Connect Part from STEP 1 & Mid Chair Frame (D) with Bolt (4) & Washers (5) Connect Chair Leg Frame (A) & Chair Side Frame (C) with Bolt (2) & Washers (5) D 2 D C C 4 2 4 4 4 A STEP 3 STEP 4 Connect Part from STEP 3 & Wood Chair Seat (B) with Bolt (3) & Washers (5) Connect Part from STEP 2 & Chair Leg Frame (A) with Bolt (2),(4) & Washers (5) 2 3 4 2 4 3 4 3 4 3 A B 4 3 3
STEP 5 STEP 6 (1 x Table assembly) Connect Table Leg Frame (E),(F) & Wood Table Top (G) with Bolt (1) & Washers (5) 5 1 E F 1 1 1 5 1 G
STEP 7 Connect Part from STEP 6 & Mid Table Frame (H),(I) with Bolt (4) & Washers (5) H 4 4 4 4 I 4 4 4 4 STEP 8 Connect Part from STEP 7 & Short Mid Table Frame (J) with Bolt (4) & Washers (5) J J 4 4 4 6 4
STEP 9 The Table Top can be folded and opened with many options 1st 2nd STEP 10 Adjustable leg pads 7
FINISH 8
