Instructions / Assembly

8
STEP 5.
Layout the Jumping Mat (C) inside the frame, and then hook one end of the spring (D)
to the V-ring sewn to the jumping mat, and another end to slot in the frame with
Spring Fixing Tool (H).
To keep the tension on the mat balanced:
For 15FT trampoline, count 18 v-rings and 18 frame slots in a clockwise direction,
and attach a second spring, count 36, 54, 72 v-rings and slots to attach the third, fourth
and fifth springs.
For 16FT trampoline, install the second springs on the opposite side of the frame.
count 27 v-rings and 27 frame slots in a clockwise direction, and attach a third spring.
Similarly, install the fourth spring on the opposite side of the frame.
Now you have 4/5 evenly spaced springs attached to the jumping mat and frame.