Instructions / Assembly

Open the carton and place all the parts onto a clean and soft surface.
Unpack all packages of hardware.
Attach Seat (B) to Left Armrest/Leg(C) using Bolts (①) and Washers (②) with
Allen Key (③) as shown in Picture.
DO NOT FULLY TIGHTEN THE BOLTS.
ATTENTION: Occasionally some of the PE Wicker shifts and covers the
mounting position preventing easy assembly.
The PE wicker should never be cut,but moved away from the mounting
positions.
Step 2
Attach the Backrest (A) and Left Armrest/Leg (C) together using Bolts (①) and
Washers (②) with Allen Key (③) as s as shown in Picture.
DO NOT FULLY TIGHTEN THE BOLTS.
Step 3
Place the Right Armrest/Leg（D）as pictureed above and affix to the Backrest
（A) and Seat（B) using Hardware（①&②）with Allen Key（③）as shown in
picture 3 and 4
DO NOT FULLY TIGHTEN THE BOLTS.
Step 4
Page 3 OF 5