Caution:You must read this before you proceed Chair Label Description QTY A Backrest 1 B Seat 1 C Left Armrest/Leg 1 D Right Armrest/Leg 1 E Seat Cushion 1 Description QTY ① Bolt (M6*35mm) 11 ② Washer 11 ③ Allen Key 1 Label Picture Picture Page 1 OF 5
Before Beginning Assembly: Overview This Chair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions here below to familiarise yourself with the parts and steps before assembly.
Open the carton and place all the parts onto a clean and soft surface. Unpack all packages of hardware. Attach Seat (B) to Left Armrest/Leg(C) using Bolts (①) and Washers (②) with Allen Key (③) as shown in Picture. DO NOT FULLY TIGHTEN THE BOLTS. ATTENTION: Occasionally some of the PE Wicker shifts and covers the mounting position preventing easy assembly. The PE wicker should never be cut,but moved away from the mounting positions.
Align the mounting positions of the Seat（B) onto Backrest（A） If the mounting position not line up enough,can slightly shake the Seat up and down. Attach the Backrest（A）to Seat（B) using Hardware（①&②）with Allen Key （③）as shown above. DO NOT FULLY TIGHTEN THE BOLTS. Step 5 Stand CHAIR right side up. Check stability and then tighten the bolts. If it wobbles,lift the chair some 30cm to 50cm high from the ground. Keep your feet and toes well away from the drop zone.
Care &Maintenance (S) 0 ✓ (S) • 8. . • ·o· • [1l] • L• � .. .. . ✓ (.__) .,.,. Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended .. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface.
