ESPRESSO MOMENT DIRECT WATER CONNECTION BEFORE YOU START IMPORTANT INFORMATION DIRECT WATER CONNECTION REQUIREMENTS ESPRESSO. PASSIONLESS Proper installation is your responsibility, Make sure you have everything necessary for correct installation. It is your responsibility to contact a qualified installer to assure that the plumbing and electrical installations are adequate and met all national and local codes and ordinances. improper installation voids any and ali warranties provided by Espresso.
REQUIRED PLUMBING MATERIALS & TOOLS REQUIRED TOOLS: Adjustable wrench, Phillips #1 and #2 screwdrivers, Teflon tape, Tory T15 screwdriver, tube cutter Mania DESCRIPTION oIY COMIC BWC kit 107251 {for Espresso Moment 100 only) ' NM2ZO0 DWC kit 1or247 {for Pressman Moment 200 only) ! 112364 3M Regardless filter cartridge 1 ” w 112365 .
HOW TO ASSEMBLE PLUMBING MATERIALS 1 To assemble the plumbing materials, follow the connection diagram shown in Figure 1, WATER TUBING 0 FIGURE NP SHUT OFF VALUE PRESSURE 144 NP ! REGULATOR ! = | MEASURE DISTANCE | a TO FILTER NP 3/8 RTFM ELBOW CONNECTOR CHECK VALVE FILTER HEAD MEASURE DISTANCE TO COFFEE MACHINE ELBOW BSP ADAPTER DWCKIT CONNECTOR an3 2 Verify the proper orientation of the pressure regulator and check valve.
HOW TO ASSEMBLE PLUMBING MATERIALS (CONT) 4 When connecting water tubing to the Murillo connectors, firmly push water tube into the quick connectors and pull to ensure proper fastening {as shown in Figure 23, Then attach 3 locking clip around the collar of the Buick connector to prevent any risk of disconnection. FIGURE 2 Ea & For threaded connections, the use of Teflon tape is required. Wrap 2-3 layers of Teflon tape aver sate thread connection to safeguard against leaks.
HOW TO ATTACH DIRECT WATER LINE TO ESPRESSO MOMENT 4 Side water tube through power 2 Attach BSP quick connect adapter to F Insert and secure water tube to BSP cord opening at corner of unit, Direct Water Connection (DWC) Kit. quick connect adapter. [Tn 4 Slide on and zip tie Espresso 8 Plug DWC Kit to access port 3. 6 Mount and screw on DWE Kit. Moments water line tube. HOW TO ACTIVATE DIRECT WATER CONNECTION 1 Press gear icon and enter “Technician Menu.” The access code is 8520.
TROUBLESHOOTING If after turning on the unit, 1 “Fill Water” alert message displays and the water tank(s} remain empty. » “Direct Water” program setting must be turned on. Please review the “HOW TC ACTIVATE DIRECT WATER CONNECTION” section and adjust the setting accordingly. = The water supply is blocked. Ensure the following: = Direct water supply is turned on or the orientation of the check valve and pressure regulator is correct.
