English User manual ES 80 Before using this appliance please read carefully the user manual and the safety instructions!
IMPORTANT SAFEGUARDS • • • • • • • • • • • • • • When using electrical appliances, basic safety precautions should always be followed, including the following: Read all instructions carefully. Do not touch hot surfaces. Use handles or knobs. To protect against fire, electric shock and personal injury do not immerse cord, plugs or appliance in water or other liquid. Close supervision is necessary when any appliance is used by or near children. Unplug from outlet when not in use and before cleaning.
CAUTION • • • • • • • Household and commercial use only. Any servicing other than cleaning and user maintenance should be performed by an authorized service representative. Do not immerse base in water or try to disassemble. To reduce the risk of fire or electric shock, do not remove the base, or any user serviceable parts inside. Repair should be done by authorized service personnel only. Check voltage to be sure that the voltage indicated on the name plate corresponds with your voltage.
Descaling Descaling warning: All green lamps are flashing Nozzle Remove nozzle/ cappuccinatore device and adapter Preparation Dismantle the cappuccino device 1. 2. Machine off Recipient (min. 0.6 l) Eject capsule Descaling 0.1l descaling Empty drip tray, remove Claris filter agent + 0.
Volume Factory setting: 40 ml 110 ml Change setting 1 2 Press button M Within 10 seconds Coffee Hot water or Press + hold 3 OK Fill cup Lever to the right STOP or min. 15 ml Release button 4 Within 10 seconds: Press button M Lever to the left New volume has been stored Troubleshooting No indication Coffee is not hot enough Coffee does not come out 4 Check plug and fuses Prewarm cup, hot water without capsule.
Preparation Temperature indicator: Switch on flashing: constant: rapid flashing: heating up ready too hot Jaw closed Fill water tank fresh water Before the first usage / after a longer period of non-use: Rinse 1. 3. Coffee outlet + hot water / steam nozzle 2. 4. Place a recipient on cup tray Let water flow for 1 minute, press buttom repeatedly Let water flow for 1 minute, press buttom repeatedly Daily: 1. Pre-heating / rinsing 2.
Espresso Insert capsule Place a cup on drip grid Select small or large cup STOP automatic or The capsule drops into capsule container Eject capsule Keep system warm Daily after last espresso Capsule container Some left over water is normal 6
Lever coffee / hot water (steam) Fresh water tank Handle Capsule container (22 capsules) Cappuccinatore device Drip grid Drip tray Status display Call authorized dealer Reposition lever Water tank empty ON/OFF button Indicator of temperature Capsule container full MEMORY lamp/button Hot water button/lamp Large cup lamp/button Small cup lamp/button Steam button/lamp 7
Cappuccino Froth milk for Preparing the milk Select «steam» heating up ready STOP Froth OK Beware of hot nozzle Temperature change ~55-75°C ready STOP Cool down system too hot Place a recipient Let water flow for 30 seconds see 8 Espresso Prepare espresso direct into the frothed up milk
Cappuccino – Caffe latte: clean after each use Warm up phase Deep into fresh water Beware of hot nozzle Rinse minimum 10 sec.
