User Manual

English

OPERATION

1. Place appliance on a flat, heat resistant, stable surface in a well

ventilated area.

2. Place the cookwell into the roaster base and cover cookwell with lid. Always

put food in the cookwell. NEVER PLACE FOOD DIRECTLY INTO THE

ROASTER BASE.

3. Preheating is recommended. To preheat, place the cookwell into roaster

base and cover. Set the control knob to its minimum setting. Plug into a 120

volt AC outlet. Reset the control knob to desired temperature. Preheat 20

minutes. Indicator light will turn o when temperature is reached. Carefully

remove lid and while using hot pads, add food into the cookwell.

4. The rack may be used for baking or roasting. Other foods, such as soups

and stews, are prepared without the rack.

5. Replace the lid. Always cook with the cookwell and lid in place.

6. If the roaster oven has not been preheated, turn the control knob to its lowest

setting. Plug the cord into a 120 volt AC outlet. Set the control knob to the

desired temperature. Fill the cookwell with food as desired. NESCO does not

recommend the use of plastic liners in cookwells.

7. Cook the food for the desired amount of time. When finished, turn the

control knob to its lowest setting, unplug the cord from the 120 volt outlet.

Allow the roaster oven to cool and clean as recommended below.

8. Cookwell and lid will be hot while in use. Use hot pads when removing lid or

cookwell from the roaster base. Tilt lid away from you to prevent

steam burns.

9. Do not move the appliance while in operation. Always remove cord from

outlet and allow to cool.

CARE AND CLEANINGCARE AND CLEANING

1. Turn control knob to MINIMUM and unplug cord from power outlet.

2. After the Roaster Oven has cooled, remove lid, rack (if used) and cookwell.

Wash these items in warm soapy water using a sponge or soft cloth.

3. To easily remove baked-on food residue, place cookwell in roaster base;

then fill cookwell with water. Cover and heat at 350ºF for 30 minutes. Turn o

and allow to cool completely. Wash cookwell as directed above.

4. NEVER IMMERSE THE ROASTER BASE IN WATER. To clean, wipe outside

of roaster base with a damp cloth and dry. Do not use abrasive cleansers on

exterior surface.

5. Porcelain enamel cookwell has a strong finish and provides easy cleaning

and years of use. However, it will chip if subjected to sharp blows or if

it’s mistreated.

6. Water spots or mineral deposits (characterized by a white film on surface)

may be removed by wiping with household vinegar and a soft cloth.