Operating instructions

7CR-1000 Series Coffee Bean Roaster
Before You Begin
Before using your NESCO
®
Professional Coffee Bean Roaster the fi rst time:
Unpack your new coffee bean roaster completely. Remove all packing
materials and make sure all parts are included. (Fig 1).
Wash Cover, Chaff Cup and Roasting Chamber in hot soapy water to
eliminate any residue from the packing that will affect the fl avor of your
fi rst roast. Rinse in clean water and dry thoroughly. All removable parts
are dishwasher safe.CAUTION: NEVER IMMERSE THE ROASTER
BASE IN WATER OR ANY OTHER LIQUID, AND NEVER PLACE
IT IN A DISHWASHER.
Make sure all parts are completely dry before reassembling your roaster.
NOTE: Set Cover on end to allow excess water to drain.
Select your favorite green coffee beans and get ready to roast your fi rst
batch!
Operating Instructions
Place Roasting Chamber on Drive Shaft and lower it onto heat shield.
Align the Guide Slots with Locator Pins, and Roasting Chamber will drop
into position on Heat Shield (Fig. 3).
Fill Roasting Chamber up to either “FILL LINE” or “DARK ROAST”
line with your choice of green coffee beans. NOTE: Do not over fi ll the
Roasting Chamber, as this could damage the roaster.
Insert Chaff Cup into top of Roasting Chamber.
Slide the Screen / Front Seal on top of Roaster Chamber and Chaff Cup,
making sure the ribbed-end of seal fi ts over end of the glass cylinder.
1.
2.
3.
4.
1.
2.
3.
4.