User manual

Filters
Nero WaveEditor 34
Drop-down menu
Modulation Signal
Selects the signal form, for instance, sine, that is displayed in
the frequency modulation picture.
Button
Blend Edges
Balances different end and start values.
Only activated for self-produced signals.
Mix mixes the original signal with the modulated amplitude signal and the modulated fre-
quency signal.
The following setting options are available in the Mix area:
Slider
Dry Signal
Indicates the intensity of the original signal.
Slider
Amplitude Modulated
Specifies the intensity of the signal with the modulated ampli-
tude.
Slider
Frequency Modulated
Specifies the intensity of the signal with the modulated fre-
quency.
6.2.10 Multi-Tap Delay Effect
The Multi-Tap-Delay effect allows several copies of the original signal to be created and
played back with a delay. This creates the reverb effect.
The following setting options are available:
Buttons
Active tap
Provides several copies for selection. Each tab represents one copy.
Graph
Gain
Graphically represents the copies.
Slider
Delay
Specifies the intervals at which copies are to be played back.
Slider
Gain
Specifies the volume/intensity of the copies.
Slider
Pan
In the case of stereo files, this indicates the speaker on which the cop-
ies are to be heard.
The following setting options are available in the Feedback area:
Drop-down
menu
Type
Provides different filters for the copied signals for selection.
Slider
Feedback
Gain
Specifies the volume of the copies that are played back after the time
specified with the Delay slider.