User manual

Filters
Nero WaveEditor 33
6.2.8 Low fidelity Effect
The Low Fidelity effect creates interference effects, so-called quantification errors, by re-
ducing the bit rate. Noise can be heard when the bit rate is dramatically reduced. If the sam-
ple rate is reduced, the audio file sounds duller and less detailed.
The following setting options are available:
Graph
Bit Depth/Sample
Rate
Shows the change in the two sliders under the graphic.
Slider
Bit depth
Specifies the bit depth. Music CDs have a bit depth of 16, for ex-
ample.
Slider
Sample Rate
Specifies the sample rate. Music CDs have a sample rate of
44100 Hz.
6.2.9 Modulation Effect
The Modulation effect allows the amplitude and frequency to be changed separately.
The following setting options are available in the Amplitude Modulation area:
Check box
Amplitude Modulation
Activates the settings options for amplitude modulation.
Graph
Amplitude Modulation
Shows the amplitude of the audio signal.
Slider
Frequency
Specifies the frequency of the signal.
Slider
Amplitude Range
Specifies the signal volume.
Drop-down menu
Modulation Signal
Selects the signal form, for instance, sine, that is displayed in
the amplitudes modulation picture.
Button
Blend Edges
Balances different end and start values.
Only activated for self-produced signals.
The following setting options are available in the Frequency Modulation area:
Check box
Frequency Modulation
Activates the settings options for frequency modulation.
Graph
Frequency Modulation
Shows the frequency of the audio signal.
Slider
Frequency
Specifies the frequency of the signal.
Slider
Depth
Specifies the depth of the signal.